Subcommittee | Subcommittee Title | Published standards | Standards under development |
---|---|---|---|
ISO/TC 61/SC 1 | Terminology | 9 | 0 |
ISO/TC 61/SC 2 | Mechanical behavior | 49 | 7 |
ISO/TC 61/SC 4 | Burning behaviour | 24 | 5 |
ISO/TC 61/SC 5 | Physical-chemical properties | 89 | 12 |
ISO/TC 61/SC 6 | Ageing, chemical and environmental resistance | 44 | 7 |
ISO/TC 61/SC 9 | Thermoplastic materials | 122 | 11 |
ISO/TC 61/SC 10 | Cellular plastics | 26 | 5 |
ISO/TC 61/SC 11 | Products | 144 | 10 |
ISO/TC 61/SC 12 | Thermosetting materials | 89 | 5 |
ISO/TC 61/SC 13 | Composites and reinforcement fibres | 109 | 18 |
ISO/TC 61/SC 14 | Environmental aspects | 41 | 17 |
Filter :
Standard and/or project under the direct responsibility of ISO/TC 61 Secretariat | Stage | ICS |
---|---|---|
Plastics and ebonite — Determination of temperature of deflection under load
|
95.99 | |
Withdrawal of ISO/R 117-1959
|
95.99 | |
Withdrawal of ISO 118-1976
|
95.99 | |
Withdrawal of ISO/R 173-1961
|
95.99 | |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of viscosity number in dilute solution
|
95.99 | |
Plastics — Determination of migration of plasticizers
|
95.99 | |
Plastics — Determination of flexural properties of rigid plastics
|
95.99 | |
Plastics — Determination of the thermal stability of polyvinyl chloride and related copolymers and their compounds by splitting off of hydrogen chloride
|
95.99 | |
Plastics — List of equivalent terms
|
95.99 | |
Plastics — List of equivalent terms — Addendum 4
|
95.99 | |
Withdrawal of ISO/R 292-1967
|
95.99 | |
Plastics — Compression moulding test specimens of thermoplastic materials
|
95.99 | |
Plastics — Injection moulding test specimens of thermoplastic materials
|
95.99 | |
Plastics — Determination of thermal stability of polyvinyl chloride, related chlorine-containing polymers and copolymers, and their compounds — Discoloration method
|
95.99 | |
Plastics — Determination of the Vicat softening temperature of thermoplastics
|
95.99 | |
Plastics — Determination of viscosity number of polyamides in dilute solution
|
95.99 | |
Withdrawal of ISO/R 462-1965
|
95.99 | |
Plastics — Methods for maintaining constant relative humidity in small enclosures by means of aqueous solutions
|
95.99 | |
Plastics — Determination of the refractive index of transparent plastics
|
95.99 | |
Plastics — Testing with the torsion pendulum
|
95.99 | |
Plastics - Non-plasticized cellulose acetate - Determination of moisture content
|
95.99 | |
Plastics — Polyamides — Determination of matter extractable by boiling methanol
|
95.99 | |
Withdrawal of ISO/R 600-1967
|
95.99 | |
Plastics — Determination of compressive properties
|
95.99 | |
Cellular rubbers and plastics — Determination of apparent density
|
95.99 | |
Plastics — Determination of indentation hardness by means of a durometer (Shore hardness)
|
95.99 | |
Withdrawal of ISO/R 869-1968
|
95.99 | |
Withdrawal of ISO/R 870-1968
|
95.99 | |
Plastics — Determination of ash of unplasticized cellulose acetate
|
95.99 | |
Plastics — Determination of resistance to change upon exposure under glass to daylight
|
95.99 | |
Withdrawal of ISO/R 878-1968
|
95.99 | |
Withdrawal of ISO/R 879-1968
|
95.99 | |
Withdrawal of ISO/R 922-1969
|
95.99 | |
Plastics — Determination of the water content in polyamides
|
95.99 | |
Plastics — Symbols
|
95.99 | |
Plastics — Homopolymer and copolymer resins of vinyl chloride — Part 2: Determination of properties
|
95.99 | |
Withdrawal of ISO 1060-1975
|
95.99 | |
Plastics — Polyamide 66, 610 and 6 — Accelerated conditioning of test specimens
|
95.99 | |
Plastics — Determination of the melt flow rate of thermoplastics
|
95.99 | |
Plastics — Determination of behaviour in a ventilated tubular oven
|
95.99 | |
Plastics — Aqueous dispersions of polymers and copolymers — Freeze-thaw cycle stability test
|
95.99 | |
Plastics — Cellulose acetate in dilute solution — Determination of viscosity number and viscosity ratio
|
95.99 | |
Plastics — Vinyl chloride homopolymers and copolymers — Determination of chlorine
|
95.99 | |
Plastics — Unplasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation
|
95.99 | |
Plastics — Methods for determining the density and relative density (specific gravity) of plastics excluding cellular plastics
|
95.99 | |
Plastics — Polyethylenes and polypropylenes in dilute solution — Determination of viscosity number and of limiting viscosity number
|
95.99 | |
Withdrawal of ISO/R 1195-1970
|
95.99 | |
Rigid cellular plastics — Bending test
|
95.99 | |
Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution
|
95.99 | |
Plastics — PVC resins — Determination of ash and sulphated ash
|
95.99 | |
Plastics — Determination of flammability and burning rate of plastics in the form of film
|
95.99 | |
Plastics — Polystyrene moulding and extrusion materials — Part 2: Determination of properties
|
95.99 | |
Withdrawal of ISO/R 1627-1970
|
95.99 | |
Plastics — Directives for the standardization of methods for the determination of the dilute solution viscosity of polymers
|
95.99 | |
Plastics — Industrial laminated sheets based on thermosetting resins — Specification
|
95.99 | |
Cellular plastics — Determination of water vapour transmission rate of rigid materials
|
95.99 | |
Plastics — Liquid resins — Determination of density by the pyknometer method
|
95.99 | |
Plastics — Specification for polyamide homopolymers
|
95.99 | |
Textile glass products — Continuous filament yarns and staple fibre yarns — Determination of twist
|
95.99 | |
Textile glass yarns — Designation
|
95.99 | |
Plastics — Aqueous dispersions of polymers and copolymers — Determination of white point temperature and minimum film-forming temperature
|
95.99 | |
Resins in the liquid state or as emulsions or dispersions — Determination of Brookfield RV viscosity
|
95.99 | |
Plastics — Amorphous thermoplastic moulding materials — Preparation of test specimens with a defined level of shrinkage — Part 1: Test specimens in the form of parallelepipedic bars (Injection moulding and compression moulding)
|
95.99 | |
Title missing - Legacy paper document
|
95.99 |
|
Plastics — Determination of time-temperature limits after exposure to prolonged action of heat
|
95.99 | |
Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 1: Designation
|
95.99 | |
Plastics — Acrylonitrile/butadiene/styrene (ABS) moulding and extrusion materials — Part 2: Determination of properties
|
95.99 | |
Cellular plastics — Test for dimensional stability of rigid materials
|
95.99 | |
Textile glass — Rovings — Basis for specification
|
95.99 | |
Withdrawal of ISO 2798-1974
|
95.99 | |
Plastics — Preparation of test specimens by machining
|
95.99 | |
Rigid cellular plastics — Determination of water absorption
|
95.99 | |
Plastics — Impact-resistant polystyrenes — Part 2: Determination of properties
|
95.99 | |
Plastics — Designation of impact-resistant polystyrenes
|
95.99 | |
Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 1: Designation
|
95.99 | |
Plastics — Plasticized compounds of homopolymers and copolymers of vinyl chloride — Part 2: Determination of properties
|
95.99 | |
Plastics — Determination of melting temperature of semi-crystalline polymers — Optical method
|
95.99 | |
Plastics — Preparation and use of multipurpose test specimens
|
95.99 | |
Plastics — Polymers in the liquid, emulsified or dispersed state — Determination of viscosity with a rotational viscometer working at defined shear rate
|
95.99 | |
Textile glass — Yarns — Determination of breaking force and breaking elongation
|
95.99 | |
Textile glass — Determination of tensile breaking force of mats
|
95.99 | |
Textile glass — Determination of twist balance index of yarns
|
95.99 | |
Withdrawal of ISO 3451-1976
|
95.99 | |
Textile glass yarns — Basis for a specification
|
95.99 | |
Withdrawal of ISR/TR 3717-1975
|
95.99 | |
Withdrawal of ISO/TR 3718-1975
|
95.99 | |
Plastics — Polyvinyl chloride pastes — Determination of apparent viscosity using the Severs rheometer
|
95.99 | |
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating roller method
|
95.99 | |
Plastics — Determination of environmental stress cracking (ESC) — Ball or pin impression method
|
95.99 | |
Plastics — PVC resins for general use — Determination of plasticizer absorption at room temperature
|
95.99 | |
Plastics — Determination of the thermal stability of polyvinyl chloride (PVC) — Conductometric method
|
95.99 | |
Plastics — Methods of exposure to laboratory light sources
|
95.99 | |
Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 1: Designation
|
95.99 | |
Plastics — Styrene/acrylonitrile (SAN) copolymer moulding and extrusion materials — Part 2: Determination of properties
|
95.99 | |
Plastics — Poly(ethylene terephthalate) granules — Determination of water content
|
95.99 | |
Plastics — Determination of environmental stress cracking (ESC) — Constant tensile stress method
|
95.99 | |
Lighters — Safety specification
|
95.99 | |
Lighters — Safety specification
|
95.99 | |
Lighters — Safety specification — Amendment 1: Clarification of structural requirements
|
95.99 | |
Plastics — Fire tests — Standard ignition sources — Technical Corrigendum 1
|
95.99 | |
Plastics — Guidelines for the recovery and recycling of plastics waste
|
95.99 | |
Utility lighters — General consumer-safety requirements — Amendment 1: Clarification of requirements and addition of safety symbols
|
95.99 |
No matching records found. Please try changing the filter settings.