Subcommittee | Subcommittee Title | Published standards | Standards under development |
---|---|---|---|
ISO/TC 22/SC 31 | Data communication | 145 | 33 |
ISO/TC 22/SC 32 | Electrical and electronic components and general system aspects | 161 | 46 |
ISO/TC 22/SC 33 | Vehicle dynamics, chassis components and driving automation systems testing | 127 | 25 |
ISO/TC 22/SC 34 | Propulsion, powertrain and powertrain fluids | 114 | 20 |
ISO/TC 22/SC 35 | Lighting and visibility | 34 | 6 |
ISO/TC 22/SC 36 | Safety and impact testing | 96 | 24 |
ISO/TC 22/SC 37 | Electrically propelled vehicles | 31 | 11 |
ISO/TC 22/SC 38 | Motorcycles and mopeds | 81 | 5 |
ISO/TC 22/SC 39 | Ergonomics | 28 | 8 |
ISO/TC 22/SC 40 | Specific aspects for light and heavy commercial vehicles, busses and trailers | 67 | 4 |
ISO/TC 22/SC 41 | Specific aspects for gaseous fuels | 106 | 27 |
Filter :
Standard and/or project under the direct responsibility of ISO/TC 22 Secretariat | Stage | ICS |
---|---|---|
Road vehicles — Installation of lighting and light signalling devices for motor vehicles and their trailers
|
95.99 | |
Lighting and signalling for motor vehicles and trailers
|
95.99 | |
Road vehicles — Installation of lighting and light signalling devices for motor vehicles and their trailers
|
95.99 | |
Road vehicles — Installation of lighting and light signalling devices for motor vehicles and their trailers — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Sound signalling devices — Technical specifications
|
95.99 | |
Road vehicles — Sound signalling devices — Technical specifications — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary
|
95.99 | |
Road vehicles — Braking of automotive vehicles and their trailers — Vocabulary
|
95.99 | |
Road vehicles — Dimensions of motor vehicles and towed vehicles — Terms and definitions
|
90.60 | |
Road vehicles — Mechanical connections between towing vehicles and trailers — Interchangeability
|
95.99 | |
Commercial road vehicles — Mechanical connections between towing vehicles and trailers — 50 mm drawbar couplings
|
95.99 | |
Road vehicles — Caravans and light trailers — Coupling ball — Dimensional characteristics
|
95.99 | |
Road vehicles — Coupling balls for caravans and light trailers — Dimensions
|
95.99 | |
Road vehicles — Weights — Vocabulary
|
95.99 | |
Road vehicles — Masses — Vocabulary and codes
|
90.60 | |
Road vehicles — Electrical connections between towing vehicles and towed vehicles with 24 V electrical equipment — Type 24 N (normal)
|
95.99 | |
Road vehicles — Electrical connections between towing and towed vehicles with 24 V systems — 7 pole connector type 24 N (normal)
|
95.99 | |
Withdrawal of ISO/R 1186-1970
|
95.99 | |
Withdrawal of ISO/R 1231-1970
|
95.99 | |
Automobiles — Anchorages for seat belts
|
95.99 | |
Withdrawal of ISO/R 1534-1970
|
95.99 | |
Road vehicles — Engines test code — Net power
|
95.99 | |
Withdrawal of ISO/R 1713-1970
|
95.99 | |
Road vehicles — Electrical connections between towing vehicles and towed vehicles with 6 or 12 V electrical equipment — Type 12 N (normal)
|
95.99 | |
Road vehicles — Electrical connections between towing and towed vehicles with 12 V systems — 7 pole connector type 12 N (normal)
|
95.99 | |
Road vehicles — Mechanical coupling between tractors and semi-trailers — Interchangeability
|
95.99 | |
Road vehicles — Mechanical coupling between tractors and semi-trailers — Interchangeability
|
95.99 | |
Road vehicles — Pneumatic braking connections between motor vehicles and towed vehicles — Interchangeability
|
95.99 | |
Road vehicles — Spark plugs M 14 x 1,25 with flat seating and their cylinder head housing
|
95.99 | |
Road vehicles — M14 x 1,25 spark-plugs with flat seating and their cylinder head housings
|
95.99 | |
Road vehicles — M14 x 1,25 spark-plugs with flat seating and their cylinder head housings — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Spark plugs M 14 x 1,25 with conical seating and their cylinder head housing
|
95.99 | |
Road vehicles — M14 x 1,25 spark-plugs with conical seating and their cylinder head housing
|
95.99 | |
Road vehicles — M14 x 1,25 spark-plugs with conical seating and their cylinder head housing
|
95.99 | |
Road vehicles — Spark plugs M 18 x 1,5 with conical seating and their cylinder head housing
|
95.99 | |
Road vehicles — M18 x 1,5 spark-plugs with conical seating and their cylinder head housing
|
95.99 | |
Road vehicles — Compact spark plugs M 14 x 1,25 with flat seating and their cylinder head housing
|
95.99 | |
Road vehicles — M14 x 1,25 compact spark-plugs with flat seating and their cylinder head housing
|
95.99 | |
Road vehicles — Compact spark plugs M 14 x 1,25 with conical seating and their head housing
|
95.99 | |
Road vehicles — M14 x 1,25 compact spark-plugs with conical seating and their cylinder head housing
|
95.99 | |
Passenger cars — Load distribution
|
95.99 | |
Passenger cars — Mass distribution
|
90.93 | |
Road vehicles — Engine test code — Gross power
|
95.99 | |
Withdrawal of ISO 2575/I-1973
|
95.99 | |
Withdrawal of ISO 2575/II-1975
|
95.99 | |
Withdrawal of ISO 2575/III-1975
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1: Child seat prohibition
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 4
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 1
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 2
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 3
|
95.99 | |
Road vehicles — Symbols for controls, indicators and tell-tales — Amendment 4
|
95.99 | |
Road vehicles — Fuel injection nozzles — Size "S"
|
95.99 | |
Diesel engines — Injection nozzle holder — Type 7
|
95.99 | |
Diesel engines — Clamp-mounted fuel injectors, types 7 and 28
|
95.99 | |
Road vehicles — Flange-mounted injection nozzle holders size "S" — Types 2, 3, 4, 5 and 6
|
95.99 | |
Road vehicles — Screw-mounted injection nozzle holders size "S" — Type 1
|
95.99 | |
Road vehicles — Spark plugs M 10 x 1 with flat seating and their cylinder head housing
|
95.99 | |
Road vehicles — M10 x 1 spark-plugs with flat seating and their cylinder head housing
|
95.99 | |
Road vehicles — Spark plugs M 12 x 1,25 with flat seating and their cylinder head housing
|
95.99 | |
Road vehicles — M12 x 1,25 spark-plugs with flat seating and their cylinder head housing
|
95.99 | |
Road vehicles — M12 x 1,25 spark-plugs with flat seating and their cylinder head housings
|
95.99 | |
Road vehicles — Vacuum braking for caravans and light trailers
|
95.99 | |
Road vehicles — Exterior protection for passenger cars
|
95.99 | |
Road vehicles — Exterior protection for passenger cars
|
60.60 | |
Road vehicles — High-pressure fuel injection pipe end-connections with 60 degrees female cone
|
95.99 | |
Road vehicles — High-pressure fuel injection pipe end-connections with 60 degree female cone
|
95.99 | |
Diesel engines — High-pressure fuel injection pipe end-connections with 60 degree female cone
|
95.99 | |
Diesel engines — High-pressure fuel injection pipe end-connections with 60 degree female cone
|
95.99 | |
Diesel engines — High-pressure fuel injection pipe end-connections with 60 degrees female cone
|
95.99 | |
Road vehicles — Passenger car wheels — Test method
|
95.99 | |
Passenger car road wheels — Test methods
|
95.99 | |
Caravans and light trailers — Couplings for vacuum braking systems — Dimensional characteristics
|
95.99 | |
Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines operating under steady state conditions
|
95.99 | |
Road vehicles — Evaluation of protrusions inside passenger cars
|
90.93 | |
Road vehicles — Headlamp cleaners
|
95.99 | |
Road vehicles — Headlamp cleaners
|
95.99 | |
Road vehicles — Ignition coil fixing band
|
95.99 | |
Road vehicles — Screened and waterproof spark plug and its connexion — Type 1
|
95.99 | |
Road vehicles — Determination of fuel leakage in the event of a collision
|
95.99 | |
Road vehicles — Windscreen defrosting systems for passenger cars — Test method
|
95.99 | |
Passenger cars — Windscreen defrosting systems — Test method
|
95.99 | |
Road vehicles — Windscreen washer systems for passenger cars — Test methods
|
95.99 | |
Road vehicles — Windscreen demisting equipment for passenger cars — Test method
|
95.99 | |
Passenger cars — Windscreen demisting systems — Test method
|
95.99 | |
Road vehicles — Safety glasses — Vocabulary
|
95.99 | |
Road vehicles — Safety glazing materials — Vocabulary
|
95.99 | |
Road vehicles — Safety glasses — Test methods for mechanical properties
|
95.99 | |
Road vehicles — Safety glazing materials — Mechanical tests
|
95.99 | |
Road vehicles — Safety glasses — Test methods for optical properties
|
95.99 | |
Road vehicles — High-tension connections for ignition coils and distributors — Part 2: Plug-type
|
95.99 | |
Road vehicles — High tension connection for ignition coils and distributors
|
95.99 | |
Road vehicles — Working voltages for lights fitted to motor vehicles and to their trailers
|
95.99 | |
Road vehicles — Frontal fixed barrier collision test method
|
95.99 | |
Road vehicles — Frontal fixed barrier or pole impact test procedure
|
95.99 | |
Road vehicles — Pressure test connection for compressed-air pneumatic braking equipment
|
95.99 | |
Road vehicles — Mounting of mechanical coupling devices on rear cross members of trucks
|
95.99 | |
Road vehicles — Electrical connections between towing vehicles and trailers with 24 V electrical equipment — Type 24 S (supplementary)
|
95.99 | |
Road vehicles — Electrical connections between towing and towed vehicles with 24 V systems — 7 pole connector type 24 S (supplementary)
|
95.99 | |
Road vehicles — Electrical connections between towing vehicles and trailers with 6 or 12 V electrical equipment — Type 12 S (supplementary)
|
95.99 | |
Road vehicules — Electrical connections between towing and towed vehicles with 12 V systems — 7 pole connector type 12 S (supplementary)
|
95.99 | |
Road vehicles — Vehicle identification number (VIN) — Content and structure
|
95.99 | |
Road vehicles — Vehicle identification number (VIN) — Content and structure
|
90.93 | |
Road vehicles — Vehicle identification number (VIN) — Content and structure
|
40.98 | |
Road vehicles — World manufacturer identifier (WMI) code
|
95.99 | |
Road vehicles — World manufacturer identifier (WMI) code
|
90.93 | |
Road vehicles — World manufacturer identifier (WMI) code — Technical Corrigendum 1
|
60.60 | |
Road vehicles — World manufacturer identifier (WMI) code
|
40.98 | |
Road vehicles — Determination of burning behaviour of interior materials for motor vehicles
|
95.99 | |
Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials
|
90.60 | |
Road vehicles — Hydraulic pressure test connection for braking equipment
|
95.99 | |
Road vehicles — Unscreened high-tension ignition cables — Part 1: Dimensions, general requirements and test methods
|
95.99 | |
Road vehicles — Unscreened high-tension ignition cables — Part 2: Cable classes, types, applicable tests and special requirements
|
95.99 | |
Road vehicles — Unscreened high-tension ignition cables — Part 2: Cable classes, types, applicable tests and special requirements — Amendment 1
|
95.99 | |
Road vehicles — Luggage compartments of passenger cars — Method of measuring the reference volume
|
95.99 | |
Passenger cars — Luggage compartments — Method of measuring reference volume
|
95.99 | |
Passenger cars — Luggage compartments — Method of measuring reference volume
|
90.60 | |
Road vehicles — Types — Terms and definitions
|
90.60 | |
Road vehicles — Fifth wheel mounting
|
95.99 | |
Road vehicles — Fifth wheel mounting
|
95.99 | |
Road vehicles — Fifth wheels — Interchangeability
|
95.99 | |
Road vehicles — Caravans and light trailers — Towing brackets and coupling balls — Strength test
|
95.99 | |
Road vehicles — Caravans and light trailers — Vacuum braking — Measurement of reaction time
|
95.99 | |
Road vehicles — Labelling of containers for petroleum or non-petroleum base brake fluid
|
95.99 | |
Passenger cars — Test track for a severe lane-change manoeuvre — Part 2: Obstacle avoidance
|
95.99 | |
Road vehicles — Test procedure for a severe lane-change manoeuvre
|
95.99 | |
Road vehicles — Trucks — Wheels/rims — Test methods
|
95.99 | |
Commercial vehicles — Wheels/rims — Test methods
|
95.99 | |
Road vehicles — Screened and waterproof spark plug and its connection — Type 2
|
95.99 | |
Road vehicles — Screened and waterproof spark plug and its connection — Type 3
|
95.99 | |
Wheels/rims — Nomenclature, designation, marking, and units of measurement
|
95.99 | |
Wheels and rims for pneumatic tyres — Vocabulary, designation and marking
|
95.99 | |
Road vehicles — Safety glasses — Test methods for resistance to radiation, high temperature, humidity and fire
|
95.99 | |
Road vehicles — Safety glazing materials — Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering
|
95.99 | |
Road vehicles — Determination of exhaust carbon monoxide concentration at idle speed
|
95.99 | |
Road vehicles — Measurement methods for exhaust gas emissions produced during inspection or maintenance
|
95.99 | |
Road vehicles — Carbon monoxide analyser equipment — Technical specifications
|
95.99 | |
Road vehicles — Measurement equipment for exhaust gas emissions during inspection or maintenance — Technical specifications
|
95.99 | |
Instruments for measuring vehicle exhaust emissions
|
95.99 | |
Instruments for measuring vehicle exhaust emissions — Amendment 1
|
95.99 | |
Road vehicles — Passenger cars — Driver hand control reach
|
95.99 | |
Road vehicles — Passenger cars — Moving barrier rear collision test method
|
95.99 | |
Road vehicles — Brake hose assemblies for hydraulic braking systems used with a non-petroleum base hydraulic fluid
|
95.99 | |
Road vehicles — Brake hose assemblies for hydraulic braking systems used with a non-petroleum-base hydraulic fluid
|
95.99 | |
Withdrawal of ISO 4008-1977
|
95.99 | |
Road vehicles — Towing vehicles — Mounting of electrical connections on rear cross members
|
95.99 | |
Towing vehicles — Mounting of electrical connections on rear cross-members
|
95.99 | |
Road vehicles — Calibrating nozzle, delay pintle type
|
95.99 | |
Road vehicles — Apparatus for measurement of the opacity of exhaust gas from diesel engines
|
95.99 | |
Road vehicles — Fuel filters for automotive compression ignition engines — Part 1: Test methods
|
95.99 | |
Road vehicles — Fuel filters for automotive compression ignition engines — Part 2: Test values and classification
|
95.99 | |
Road vehicles — Low tension cable connections for ignition coils
|
95.99 | |
Road vehicles — Vehicle identification number (VIN) — Location and attachment
|
90.93 | |
Road vehicles — Hydraulic braking systems — Pipes, tapped holes and male fittings
|
95.99 | |
Road vehicles — Hydraulic braking systems — Pipes, tapped holes, male fittings and hose end fittings
|
95.99 | |
Road vehicles — Pneumatic braking systems — Pipes, tapped holes and male fittings
|
95.99 | |
Road vehicles — Passenger cars — Location of hand controls, indicators and tell-tales
|
95.99 | |
Passenger cars — Location of hand controls, indicators and tell-tales
|
95.99 | |
Road vehicles — Location of hand controls, indicators and tell-tales in motor vehicles
|
95.99 | |
Road vehicles — Caravans and light trailers — Electromagnetic braking
|
95.99 | |
Road vehicles — 90 semi-trailer fifth wheel coupling pin — Basic and mounting/interchangeability dimensions
|
95.99 | |
Road vehicles — Electrical connections between towing vehicle and trailers — Test methods and requirements
|
95.99 | |
Road vehicles — Electrical connections between towing vehicle and trailers — Test methods and requirements — Addendum 1
|
95.99 | |
Road vehicles — Connectors for electrical connections between towing vehicles and trailers — Test methods and performance requirements
|
95.99 | |
Road vehicles — Connectors for electrical connections between towing vehicles and trailers — Test methods and performance requirements — Amendment 1
|
95.99 | |
Road vehicles — Diagnostic systems for motor vehicles — Vocabulary
|
95.99 | |
Road vehicles — Diagnostic systems for motor vehicles — Vocabulary
|
95.99 | |
Road vehicles — Diagnostic systems for motor vehicles — Vocabulary — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Fuel injection pumps — High pressure pipes for testing
|
95.99 | |
Road vehicles — Fuel injection pumps — High-pressure pipes for testing
|
95.99 | |
Road vehicles — World parts manufacturer identifier (WPMI) code
|
90.60 | |
Road vehicles — Motorcycles — Engine test code — Net power
|
95.99 | |
Motorcycles — Engine test code — Net power
|
95.99 | |
Motorcycles — Engine test code — Net power
|
95.99 | |
Road vehicles — Wheels for commercial vehicles — Dimensional characteristics of attachment on hub
|
95.99 | |
Commercial vehicles — Wheel hub attachment dimensions
|
95.99 | |
Commercial vehicles — Wheel hub attachment dimensions
|
95.99 | |
Road vehicles — Calibration fluid for diesel injection equipment
|
95.99 | |
Road vehicles — Calibration fluid for diesel injection equipment
|
95.99 | |
Road vehicles — Caravans and light trailers — Static load on ball couplings
|
95.99 | |
Road vehicles — Mopeds — Symbols for controls, indicators and tell-tales
|
95.99 | |
Mopeds — Symbols for controls, indicators and tell-tales
|
95.99 | |
Road vehicles — Three-dimensional reference system and fiducial marks — Definitions
|
90.93 | |
Road vehicles — Dimensional codes for passenger cars
|
90.60 | |
Road vehicles — Steady-state circular test procedure
|
95.99 | |
Passenger cars — Steady-state circular driving behaviour — Open-loop test procedure
|
95.99 | |
Passenger cars — Steady-state circular driving behaviour — Open-loop test methods
|
95.99 | |
Road vehicles — Multi-core connecting cables — Part 1: Test methods and requirements for basic performance sheathed cables
|
95.99 | |
Road vehicles — Multi-core connecting cables — Part 2: Test methods and requirements for high performance sheathed cables
|
95.99 | |
Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables
|
95.99 | |
Road vehicles — Multi-core connecting cables — Part 3: Construction, dimensions and marking of unscreened sheathed low-voltage cables — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Multi-core connecting cables — Part 4: Articulation test method and requirements for coiled cable assemblies
|
95.99 | |
Road vehicles — Seven-core connecting cable
|
95.99 | |
Road vehicles — Seven-core connecting cables
|
95.99 | |
Road vehicles — Special warning lights — Dimensions
|
95.99 | |
Road vehicles — Special warning lamps — Dimensions
|
95.99 | |
Road vehicles — Special warning lamps — Dimensions
|
95.99 | |
Road vehicles — Mopeds — Type, location and functions of controls
|
95.99 | |
Road vehicles — Mopeds — Engine test code — Net power
|
95.99 | |
Road vehicles — Electrical connections — Double-pole connector
|
95.99 | |
Road vehicles — Motor vehicles — Measurement of variation of passing beam inclination as a function of load
|
95.99 | |
Motor vehicles — Measurement of variations in dipped-beam headlamp angle as a function of load
|
95.99 | |
Motor vehicles — Measurement of variations in dipped-beam headlamp angle as a function of load
|
95.99 | |
Road vehicles — Visibility — Method for establishment of eyellipses for driver's eye location
|
95.99 | |
Road vehicles — Visibility — Method for establishment of eyellipses for driver's eye location
|
95.99 | |
Road vehicles — Safety and cybersecurity for automated driving systems — Design, verification and validation
|
90.92 | |
Road vehicles — Non-petroleum base brake fluid
|
95.99 | |
Road vehicles — Hydraulic brake systems — Non-petroleum base reference fluids
|
95.99 | |
Road vehicles — Elastomeric boots for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C maximum)
|
95.99 | |
Road vehicles — Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
|
95.99 | |
Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (Service temperature 150 degrees C max.)
|
95.99 | |
Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
|
95.99 | |
Inlet air cleaning equipment for internal combustion engines and compressors — Performance testing
|
95.99 | |
Road vehicles — Rear-window demisting system for passenger cars — Test method
|
95.99 | |
Passenger cars — Rear-window demisting system — Test method
|
95.99 | |
Road vehicles — Rear-window defrosting system for passenger cars — Test method
|
95.99 | |
Road vehicles — Elastomeric boots for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100 degrees C max.)
|
95.99 | |
Road vehicles — Elastomeric cups and seals for hydraulic brake actuating cylinders using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
|
95.99 | |
Road vehicles — Elastomeric seals for hydraulic disc brake cylinders using a non-petroleum base hydraulic brake fluid (service temperature 120 degrees C max.)
|
95.99 | |
Road vehicles — Brake hose assemblies for hydraulic braking systems used with a petroleum-base hydraulic fluid
|
95.99 | |
Road vehicles — Rear-window washing and wiping systems for passenger cars — Test methods
|
95.99 | |
Road vehicles — Brake linings — Compressibility — Test procedure
|
95.99 | |
Road vehicles — Brake linings — Compressive strain test method
|
95.99 | |
Road vehicles — Brake linings — Shear strength of disc brake pad and drum brake shoe assemblies — Test procedure
|
95.99 | |
Road vehicles — Brake linings — Shear test procedure for disc brake pad and drum brake shoe assemblies
|
95.99 | |
Internal combustion engines — Spin-on filters for lubricating oil — Dimensions
|
95.99 | |
Internal combustion engines — Spin-on filters for lubricating oil — Dimensions
|
95.99 | |
Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions
|
95.99 | |
Road vehicles — Measurement method of gaseous pollutants emitted by motorcycles equipped with a controlled ignition engine
|
95.99 | |
Electric road vehicles — Safety specifications — Part 1: On-board electrical energy storage
|
95.99 | |
Electric road vehicles — Safety specifications — Part 2: Functional safety means and protection against failures
|
95.99 | |
Electric road vehicles — Safety specifications — Part 3: Protection of persons against electric hazards
|
95.99 | |
Electric road vehicles — Safety specifications — Part 3: Protection of persons against electric hazards — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Techniques of measurement in impact tests — Instrumentation
|
95.99 | |
Road vehicles — Measurement techniques in impact tests — Instrumentation
|
95.99 | |
Road vehicles — Measurement techniques in impact tests — Instrumentation
|
95.99 | |
Road vehicles — Measurement techniques in impact tests — Instrumentation
|
95.99 | |
Road vehicles — Measurement techniques in impact tests — Instrumentation — Amendment 1: .
|
95.99 | |
Ignition systems — Part 1: Vocabulary
|
95.99 | |
Road vehicles — Ignition systems — Part 1: Vocabulary
|
95.99 | |
Ignition systems — Part 2: Test methods
|
95.99 | |
Tapers for shaft ends and hubs for fuel injection pumps
|
95.99 | |
Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs
|
95.99 | |
Road vehicles — Information core appropriate to the field study of accidents in which seat belts are used
|
95.99 | |
Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 3: M10 glow-plugs
|
95.99 | |
Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 3: M10 glow-plugs
|
95.99 | |
Road vehicles — Sheath-type glow-plugs with conical seating and their cylinder head housing — Part 4: M8 x 1 glow-plugs
|
95.99 | |
Road vehicles — Glow plugs M 12x1,25 and M 14x1,25 sheath type and cylinder head housing dimensions
|
95.99 | |
Road vehicles — Glow plugs M 12x1,25 and M 14x1,25 sheath type and cylinder head housing dimensions — Addendum 1
|
95.99 | |
Road vehicles — M12 x 1,25 and M14 x 1,25 sheath-type glow-plugs with conical seating and their cylinder head housing
|
95.99 | |
Road vehicles — Passenger car braking systems — Measurement of the braking performance
|
95.99 | |
Road vehicles — Hydraulic braking systems — Measurement of braking performance
|
95.99 | |
Road vehicles — Motor vehicles with hydraulic braking systems with and without antilock device — Measurement of braking performance
|
95.99 | |
Internal combustion engines — Piston rings — Part 1: Vocabulary
|
95.99 | |
Internal combustion engines — Piston rings — Part 2: Inspection measuring principles
|
95.99 | |
Internal combustion engines — Piston rings — Part 3: Material specifications
|
95.99 | |
Internal combustion engines — Piston rings — Part 4: General specifications
|
95.99 | |
Internal combustion engines — Piston rings — Part 4: General specifications
|
95.99 | |
Internal combustion engines — Piston rings — Part 5: Quality requirements
|
95.99 | |
Internal combustion engines — Piston rings — Part 5: Quality requirements
|
95.99 | |
Internal combustion engines — Piston rings — Part 1: Rectangular rings
|
95.99 | |
Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel
|
95.99 | |
Internal combustion engines — Piston rings — Part 2: Rectangular rings with narrow ring width
|
95.99 | |
Internal combustion engines — Piston rings — Scraper rings
|
95.99 | |
Internal combustion engines — Piston rings — Scraper rings made of cast iron
|
95.99 | |
Internal combustion engines — Piston rings — Part 1: Keystone rings
|
95.99 | |
Internal combustion engines — Piston rings — Part 2: Half keystone rings
|
95.99 | |
Internal combustion engines — Piston rings — Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron
|
95.99 | |
Internal combustion engines — Piston rings — Expander/segment oil-control rings
|
95.99 | |
Internal combustion engines — Piston rings — Expander/segment oil control rings
|
95.99 | |
Road vehicles — Unscreened low-tension cables — Part 1: General requirements and test methods
|
95.99 | |
Road vehicles — Unscreened low-tension cables — Part 1: General requirements and test methods
|
95.99 | |
Road vehicles — Unscreened low-tension cables — Part 1: Test methods
|
95.99 | |
Unscreened low-tension cables — Part 2: Cable classes, applicable tests and special requirements
|
95.99 | |
Road vehicles — Unscreened low-tension cables — Part 2: Cable classes, applicable tests and special requirements
|
95.99 | |
Road vehicles — Unscreened low-tension cables — Part 2: Requirements
|
95.99 | |
Road vehicles — Unscreened low-tension cables — Part 3: Conductor sizes and dimensions
|
95.99 | |
Road vehicles — Unscreened low-tension cables — Part 3: Conductor sizes and dimensions for thick-wall insulated cables
|
95.99 | |
Road vehicles — Unscreened low-tension cables — Part 4: Conductor sizes and dimensions for thin-wall insulated cables
|
95.99 | |
Road vehicles — 60 V and 600 V single-core cables — Dimensions, test methods and requirements
|
95.99 | |
Road vehicles — 60 V and 600 V single-core cables — Dimensions, test methods and requirements
|
95.99 | |
Road vehicles — Weights of mopeds and motorcycles with two wheels — Vocabulary
|
95.99 | |
Road vehicles — Motorcycles — Symbols for controls, indicators and telltales
|
95.99 | |
Road vehicles — Collisions — Terminology
|
95.99 | |
Road vehicles — Measurement methods for gaseous pollutants emitted by mopeds equipped with a controlled ignition engine
|
95.99 | |
Road vehicles — Unscreened high-tension ignition cable assemblies — General requirements and test methods
|
95.99 | |
Road vehicles — Unscreened high-tension ignition cable assemblies — General requirements and test methods
|
95.99 | |
Road vehicles — Sound signalling devices — Tests after mounting on vehicle
|
95.99 | |
Road vehicles — Sound signalling devices — Tests after mounting on vehicle
|
95.99 | |
Motorcycles and mopeds — Pollution tests — Chassis dynamometer bench
|
95.99 | |
Road vehicles — Pollution tests for motorcycles and mopeds — Bench (chassis dynamometer)
|
95.99 | |
Road vehicles — Screw-in injection nozzle holder types 20 and 21 for pintle nozzle size "S", type "B"
|
95.99 | |
Road vehicles — Screw-in injection nozzle holders, types 20, 21 and 27 for pintle nozzle size "S", type "B"
|
95.99 | |
Road vehicles — Screw-mounted injection nozzle holder, types 12, 13, 14, 15, 16, 17, 18 and 19
|
95.99 | |
Road vehicles — Measurement method for the maximum speed of mopeds
|
95.99 | |
Mopeds — Measurement of maximum speed
|
95.99 | |
Road vehicles — Measurement method for the maximum speed of motorcycles
|
95.99 | |
Motorcycles — Measurement of maximum speed
|
95.99 | |
Road vehicles — Motorcycles — Mounting of rear shock absorbers
|
95.99 | |
Road vehicles — Wheels — Impact test procedure
|
95.99 | |
Road vehicles — Wheels — Impact test procedure — Technical Corrigendum 1
|
95.99 | |
Passenger cars — Light alloy wheels — Impact test
|
95.99 | |
Road vehicles — Lighting and light signalling devices — Vocabulary
|
95.99 | |
Road vehicles — Lighting and light signalling devices — Vocabulary — Amendment 1
|
95.99 | |
Road vehicles — Masses and dimensions of caravans — Terms and definitions
|
95.99 | |
Road vehicles — End-mounting flanges for fuel injection pumps
|
95.99 | |
Diesel engines — End-mounting flanges for fuel injection pumps
|
95.99 | |
Road vehicles — Compression ignition engines — Heads for spin-on fuel filters with horizontal flange — Mounting and connecting dimensions
|
95.99 | |
Road vehicles — Compression ignition engines — Heads for fuel filters with vertical flange — Mounting and connecting dimensions
|
95.99 | |
Road vehicles — Air filter connections — Types A and B
|
95.99 | |
Road vehicles — Diagnostic systems — Equipment for ignition systems testing
|
95.99 | |
Road vehicles — Coiled pipe assemblies for pneumatic braking connection between motor vehicles and towed vehicles — Part 1: Dimensions
|
95.99 | |
Road vehicles — Motorcycles — D.C. flasher units
|
95.99 | |
Road vehicles — Motorcycles — A.C. flasher units
|
95.99 | |
Road vehicles — Mopeds — A.C. flasher units
|
95.99 | |
Road vehicles — Lateral transient response test methods
|
95.99 | |
Road vehicles — Lateral transient response test methods — Open-loop test methods
|
95.99 | |
Road vehicles — Fuel injection equipment testing — Part 1: Calibrating nozzle and holder assemblies
|
95.99 | |
Road vehicles — Fuel injection equipment testing — Part 2: Orifice plate flow measurement
|
95.99 | |
Commercial vehicles and buses — Cylindrical shaft ends and hubs for alternators
|
95.99 | |
Commercial vehicles and buses — Cylindrical shaft ends and hubs for alternators — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Wheels for commercial vehicles — Flat attachment — Fixing nuts
|
95.99 | |
Road vehicles — Heads for two-stage fuel filters for compression ignition engines — Mounting and connecting dimensions
|
95.99 | |
Road vehicles — Heads for fuel filters with vertical flange and three bolt fixing for compression ignition engines — Mounting and connecting dimensions
|
95.99 | |
Road vehicles — Glow plugs, sheath type — General requirements and test methods
|
95.99 | |
Road vehicles — Sheath-type glow-plugs — General requirements and test methods
|
95.99 | |
Road vehicles — Sheath-type glow-plugs — General requirements and test methods
|
95.99 | |
Road vehicles — Relays and flashers — Mounting and positioning dimensions of male tabs and socket apertures for relays and flashers
|
95.99 | |
Base mounted in-line fuel injection pumps
|
95.99 | |
Diesel engines — Base-mounted in-line fuel injection pumps — Mounting dimensions
|
95.99 | |
Diesel engines — Base-mounted in-line fuel injection pumps and high-pressure supply pumps for common rail fuel injection systems — Mounting dimensions
|
95.99 | |
Road vehicles — Thermoplastic tubing for use in air braking systems — Part 1: Dimensions and marking
|
95.99 | |
Road vehicles — Thermoplastics tubing for air braking systems — Part 1: Dimensions and marking
|
95.99 | |
Road vehicles — Thermoplastics tubing for air braking systems — Part 2: Mounting on vehicle and test methods
|
95.99 | |
Road vehicles — Thermoplastics tubing for use in air braking systems — Part 2: Installation on the vehicle and test methods
|
95.99 | |
Road vehicles — Thermoplastics tubing for air braking systems — Part 2: Mounting on vehicle and test methods — Technical Corrigendum 1
|
95.99 | |
Towed road vehicles — Compressed-air braking systems — Measurement of braking performance
|
95.99 | |
Road vehicles — Compressed-air braking systems — Test procedures
|
95.99 | |
Road vehicles — Air or air over hydraulic braking systems — Measurement of braking performance
|
95.99 | |
Road vehicles — Air or air-over hydraulic braking systems for motor vehicles (including those with electronic control functions) — Test procedures
|
95.99 | |
Bells for bicycles and mopeds — Technical specifications
|
95.99 | |
Road vehicles — Electrical disturbance by conduction and coupling — Part 0: Definitions and general
|
95.99 | |
Road vehicles — Electrical interference by conduction and coupling — Part 0: General and definitions
|
95.99 | |
Road vehicles — Electrical disturbance by conduction and coupling — Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage — Electrical transient conduction along supply lines only
|
95.99 | |
Road vehicles — Electrical interference by conduction and coupling — Part 1: Vehicles with nominal 12 V supply voltage — Electrical transient conduction along supply lines only
|
95.99 | |
Road vehicles — Electrical disturbance by conduction and coupling — Part 2: Commercial vehicles with nominal 24 V supply voltage — Electrical transient conduction along supply lines only
|
95.99 | |
Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only
|
95.99 | |
Road vehicles — Electrical disturbances from conduction and coupling — Part 2: Electrical transient conduction along supply lines only — Amendment 1
|
95.99 | |
Road vehicles — Electrical disturbance by conduction and coupling — Part 3: Vehicles with nominal 12 V or 24 V supply voltage — Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
|
95.99 | |
Road vehicles — Electrical disturbance by conduction and coupling — Part 3: Vehicles with nominal 12 V or 24 V supply voltage — Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Electrical connectors for braking systems — Part 1: Connectors for 24 V nominal supply voltage
|
95.99 | |
Road vehicles — Electrical connectors for braking systems — Part 1: Connectors for 24 V nominal supply voltage — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Electrical connectors for braking systems — Part 2: Connectors for 12 V nominal supply voltage
|
95.99 | |
Road vehicles — Electrical connectors for braking systems — Part 2: Connectors for 12 V nominal supply voltage — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Brake anti-lock device connector
|
95.99 | |
Road vehicles — Caravans and light trailers — Calculation of the mechanical strength of the drawbar — Part 1: Steel drawbars
|
95.99 | |
Road vehicles — Caravans and light trailers — Trailers of categories 01 and 02 — Inertia bench test procedures for overrun brakes
|
95.99 | |
Road vehicles — Caravans and light trailers — Bench test methods for brake controls for inertia braked trailers of categories 01 and 02
|
95.99 | |
Road vehicles — Measurement of opacity of exhaust gas from compression-ignition (diesel) engines — Lug-down test
|
95.99 | |
Road vehicles — Measurement of opacity of exhaust gas from compression-ignition (diesel) engines — Steady single-speed test
|
95.99 | |
Road vehicles — Base-mounted air compressors, single cylinder V-belt drive — Mounting dimensions
|
95.99 | |
Road vehicles — Base-mounted air compressors, single cylinder V-belt drive — Mounting dimensions — Amendment 1
|
95.99 | |
Compression ignition engines — Spin-on fuel filters — Mounting and connecting dimensions
|
95.99 | |
Road vehicles — Spin-on fuel filters for compression-ignition engines — Mounting and connecting dimensions
|
95.99 | |
Road vehicles — Commercial vehicles — Clearance envelope for power take-offs (PTO)
|
95.99 | |
Road vehicles — Air filter elements for commercial vehicles — Dimensions — Part 1: Types A and B
|
95.99 | |
Road vehicles — Compression ignition engines — Single fuel filters with horizontal flange and centre bolt fixing — Mounting and connecting dimensions
|
95.99 | |
Mopeds — Fuel consumption measurements
|
95.99 | |
Road vehicles — Motorcycles — Method of measuring fuel consumption
|
95.99 | |
Motorcycles — Methods of measuring fuel consumption
|
95.99 | |
Passenger cars — Sled test procedure for evaluating adult restraint systems in simulated frontal collisions
|
95.99 | |
Fuel injection equipment — Vocabulary — Part 1: Fuel injection pumps
|
95.99 | |
Fuel injection equipment — Vocabulary — Part 4: High-pressure pipes and end-connections
|
95.99 | |
Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions
|
95.99 | |
Road vehicles — Cradle-mounted in-line fuel injection pumps — Mounting dimensions
|
95.99 | |
Road vehicles — Relays — Arrangement and functional attribution of relay terminals
|
95.99 | |
Road vehicles — Brake linings — Evaluation of friction material characteristics — Small sample bench test procedure
|
95.99 | |
Road vehicles — Brake linings — Determination of thermal conductivity by guarded hot-plate apparatus
|
95.99 | |
Road vehicles — Braking in a turn — Open loop test procedure
|
95.99 | |
Passenger cars — Braking in a turn — Open-loop test procedure
|
95.99 | |
Road vehicles — Air filter elements for passenger cars — Types P and R — Dimensions
|
95.99 | |
Road vehicles — Mopeds — D.C. flasher units
|
95.99 | |
Road vehicles — Flat, quick-connect terminations — Part 1: Tabs for single pole connections
|
95.99 | |
Road vehicles — Flat, quick-connect terminations — Part 2: Tests and performance requirements for single pole connections
|
95.99 | |
Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements
|
95.99 | |
Road vehicles — Connections for on-board electrical wiring harnesses — Part 2: Definitions, test methods and general performance requirements
|
95.99 | |
Road vehicles — Connections for on-board electrical wiring harnesses — Part 6: In-vehicle Ethernet, general performance requirements and interface definitions
|
40.98 | |
Road vehicles — Levelling devices for headlamp dipped beam
|
95.99 | |
Road vehicles — Measurement of road surface friction
|
95.99 | |
Road vehicles — High friction test track surface — Specifications
|
95.99 | |
Road vehicles — Instructions for the implementation of the assignment of world manufacturer identifier (WMI) codes for vehicle identification number (VIN) systems and for world parts manufacturer identifier (WPMI) codes
|
60.60 | |
Road vehicles — M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housing
|
95.99 | |
Road vehicles — M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housing — Amendment 1
|
95.99 | |
Road vehicles — M14 x 1,25 spark-plugs with flat seating and 16 mm hexagon and their cylinder head housings
|
95.99 | |
Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall steel tubes
|
95.99 | |
Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes
|
95.99 | |
Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes — Amendment 1
|
95.99 | |
Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes
|
95.99 | |
Diesel engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes
|
95.99 | |
Compression-ignition engines — Steel tubes for high-pressure fuel injection pipes — Part 2: Requirements for composite tubes
|
95.99 | |
Motorcycles — Light-alloy wheels — Test method
|
95.99 | |
Commercial vehicles and buses — Cross-tooth gearbox flanges, type T
|
95.99 | |
Road vehicles — Caravans and light trailers — Control device for inertia braking — Calculation of forces
|
95.99 | |
Caravans and light trailers — Couplings — Strength tests
|
95.99 | |
Mopeds — Measurement method for location of centre of gravity
|
95.99 | |
Mopeds — Brakes and braking devices — Tests and measurement methods
|
95.99 | |
Mopeds — Brakes and braking devices — Tests and measurement methods — Technical Corrigendum 1
|
95.99 | |
Motorcycles — Brakes and braking devices — Tests and measurement methods
|
95.99 | |
Electric road vehicles — Vocabulary
|
95.99 | |
Electric road vehicles — Vocabulary
|
95.99 | |
Electric road vehicles — Road operating characteristics
|
90.92 | |
Commercial road vehicles — Fifth wheel coupling pins — Strength tests
|
95.99 | |
Commercial road vehicles — Fifth wheel couplings — Strength tests
|
95.99 | |
Commercial road vehicles — Drawbar couplings and eyes for hinged drawbars — Strength test
|
95.99 | |
Commercial vehicles and buses — Four-hole flanges for gear-driven air compressors
|
95.99 | |
Road vehicles — Measurement techniques in impact tests — Optical instrumentation
|
95.99 | |
Road vehicles — Transient open-loop response test method with one period of sinusoidal input
|
95.99 | |
Road vehicles — Transient open-loop response test method with pseudo-random steering input
|
95.99 | |
Commercial road vehicles — Mechanical connections between towing vehicles and trailers — 40 mm drawbar coupling
|
95.99 | |
Road vehicles — Blade-type electric fuse-links — Part 1: Rated current, identification, test procedures and performance requirements
|
95.99 | |
Road vehicles — Fuse-links — Part 1: Definitions and general test requirements
|
95.99 | |
Road vehicles — Blade-type electric fuse-links — Part 2: Dimensions
|
95.99 | |
Road vehicles — Fuse-links — Part 2: User's guide
|
95.99 | |
Road vehicles — Blade-type electric fuse-links — Part 3: Test fixture
|
95.99 | |
Road vehicles — Fuse-links — Part 3: Fuse-links with tabs (blade type)
|
95.99 | |
Road vehicles — Fuse-links — Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
|
95.99 | |
Road vehicles — Alternators with regulators — Test methods and general requirements
|
95.99 | |
Road vehicles — Vehicle dynamics and road-holding ability — Vocabulary
|
95.99 | |
Road vehicles — Vehicle dynamics and road-holding ability — Vocabulary — Addendum 1: Russian language version
|
95.99 | |
Road vehicles — Starter motors — Test methods and general requirements
|
95.99 | |
Road vehicles — Electrical performance of starter motors — Test methods and general requirements
|
95.99 | |
Road vehicles — Electrical performance of starter motors — Test methods and general requirements — Amendment 1
|
95.99 | |
Road vehicles — Flashers — Functional allocation of terminals
|
95.99 | |
Road vehicles — Testing of fuel injectors for compression-ignition engines — Part 1: Hand-lever-operated testing and setting apparatus
|
95.99 | |
Road vehicles — Testing of fuel injectors for compression-ignition engines — Part 2: Test procedures
|
95.99 | |
Mopeds — Measurement method for moments of inertia
|
95.99 | |
Road vehicles — Compression-ignition engines — Screw-in injection nozzle holders, types 24, 25 and 26
|
95.99 | |
Road vehicles — Graphical symbols to designate brake fluid types
|
95.99 | |
Motorcycles — Measurement methods for moments of inertia
|
95.99 | |
Motorcycles — Measurement method for location of centre of gravity
|
95.99 | |
Passenger cars — Engine cooling systems — Threaded pressure caps and their seats on filler necks
|
95.99 | |
Road vehicles — Driver hand-control reach — In-vehicle checking procedure
|
95.99 | |
Road vehicles — Anthropomorphic side impact dummy — Part 1: Lateral head impact response requirements to assess biofidelity of dummy
|
95.99 | |
Road vehicles — Anthropomorphic side impact dummy — Part 2: Lateral neck impact response requirements to assess biofidelity of dummy
|
95.99 | |
Road vehicles — Anthropomorphic side impact dummy — Part 3: Lateral thoracic impact response requirements to assess biofidelity of dummy
|
95.99 | |
Road vehicles — Anthropomorphic side impact dummy — Part 4: Lateral shoulder impact response requirements to assess biofidelity of dummy
|
95.99 | |
Road vehicles — Anthropomorphic side impact dummy — Part 5: Lateral abdominal impact response requirements to assess biofidelity of dummy
|
95.99 | |
Road vehicles — Anthropomorphic side impact dummy — Part 6: Lateral pelvic impact response requirements to assess biofidelity of dummy
|
95.99 | |
Passenger-car/trailer combinations — Lateral stability test
|
95.99 | |
Road vehicles — Passenger-car and trailer combinations — Lateral stability test
|
95.99 | |
Passenger cars — Power-off reactions of a vehicle in a turn — Open-loop test method
|
95.99 | |
Road vehicles — Trailers, including caravans — Height of coupling head
|
95.99 | |
Road vehicles — Generation of standard EM field for calibration of power density meters from 20 kHz to 1 000 MHz
|
95.99 | |
Mopeds — Positioning of lighting and light-signalling devices
|
95.99 | |
Road vehicles with two axles — Determination of centre of gravity
|
95.99 | |
Road vehicles — Intelligent power switches — Part 1: High-side intelligent power switch
|
95.99 | |
Motor vehicle road load — Determination under reference atmospheric conditions and reproduction on chassis dynamometer
|
95.99 | |
Commercial road vehicles — Flat attachment fixing nuts — Test methods
|
95.99 | |
Road vehicles — Flat attachment fixing nuts for commercial vehicles — Test methods
|
95.99 | |
Road vehicles — Test methods for electrical disturbances from electrostatic discharge
|
95.99 | |
Road vehicles — Electrical disturbances from electrostatic discharge
|
95.99 | |
Road vehicles — Test procedures for evaluating out-of-position vehicle occupant interactions with deploying air bags
|
95.99 | |
Road vehicles — Pedestrian protection — Impact test method for pedestrian thigh, leg and knee
|
95.99 | |
Road vehicles — Roof load carriers — Part 1: Roof bars
|
95.99 | |
Road vehicles — Roof load carriers — Part 4: Magnetic fixing devices
|
95.99 | |
Road vehicles — Air filters for passenger compartments — Part 1: Test for particle filtration
|
95.99 | |
Road vehicles — Air filters for passenger compartments — Part 2: Test for gaseous filtration
|
95.99 | |
Road vehicles — Brake lining assemblies — Inertia dynamometer test method
|
95.99 | |
Commercial road vehicles — Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers — Interchangeability
|
95.99 | |
Commercial road vehicles — Mechanical coupling between towing vehicles with coupling mounted forward and below, and centre-axle trailers — Interchangeability
|
95.99 | |
Passenger cars and light commercial vehicles with 12 V systems — 13-pole connectors between towing vehicles and trailers — Dimensions and contact allocation
|
95.99 | |
Passenger cars and light commercial vehicles with 12 V systems — 13-pole connectors between towing vehicles and trailers — Dimensions and contact allocation
|
95.99 | |
Passenger cars and light commercial vehicles with 12 V systems — 13-pole connectors between towing vehicles and trailers — Dimensions and contact allocation — Amendment 1
|
95.99 | |
Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 13-pole connectors for vehicles with 12 V nominal supply voltage
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 1: General and definitions
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 1: General and definitions — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General and definitions
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 2: Off-vehicle radiation source
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 2: Off-vehicle radiation source — Amendment 1
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 2: Off-vehicle radiation source — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Off-vehicle radiation sources
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 3: On-board transmitter simulation
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods — Part 4: Bulk current injection (BCI)
|
95.99 | |
Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI)
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 1: General and definitions
|
95.99 | |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General and definitions
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 2: Absorber-lined chamber
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 3: Transverse electromagnetic mode (TEM) cell
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 4: Bulk current injection (BCI)
|
95.99 | |
Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 4: Bulk current injection (BCI)
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 5: Stripline
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 6: Parallel plate antenna — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods — Part 7: Direct radio frequency (RF) power injection
|
95.99 | |
Two-wheeled motorcycles — Positioning of lighting and light-signalling devices
|
95.99 | |
Two-wheeled motorcycles — Fuel consumption measurements — Chassis dynamometer setting by coastdown method
|
95.99 | |
Road vehicles — Towed vehicles with compressed-air braking system and antilock braking system — Measurement of braking performance
|
95.99 | |
Road vehicles — Low-speed serial data communication — Part 2: Low-speed controller area network (CAN) — Amendment 1
|
95.99 | |
Road vehicles — Spark-plugs — Test methods and requirements
|
95.99 | |
Road vehicles — Motor vehicles with antilock braking system — Measurement of braking performance
|
95.99 | |
Road vehicles — Motor vehicles with antilock braking systems (ABS) — Measurement of braking performance
|
95.99 | |
Road vehicles — Interchange of digital information — Controller area network (CAN) for high-speed communication
|
95.99 | |
Road vehicles — Interchange of digital information — Controller area network (CAN) for high-speed communication — Amendment 1
|
95.99 | |
Road vehicles — Electrical connections between towing and towed vehicles — Interchange of digital information — Part 1: Physical layer and data link layer
|
95.99 | |
Road vehicles — Electrical connections between towing and towed vehicles — Interchange of digital information — Part 2: Application layer for braking equipment
|
95.99 | |
Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 2: Application layer for brakes and running gear
|
95.99 | |
Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 2: Application layer for brakes and running gear — Amendment 1
|
95.99 | |
Road vehicles — Electrical connections between towing and towed vehicles — Interchange of digital information — Part 3: Application layer for non-braking equipment
|
95.99 | |
Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 4: Diagnostics
|
95.99 | |
Road vehicles — Interchange of digital information on electrical connections between towing and towed vehicles — Part 4: Diagnostics — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Sensitivity to lateral wind — Part 1: Open-loop test method using wind generator input
|
95.99 | |
Commercial vehicles with 24 V systems — 15-pole connectors between towing vehicles and trailers — Dimensions and contact allocation
|
95.99 | |
Commercial vehicles with 24 V systems — 15-pole connectors between towing vehicles and trailers — Dimensions and contact allocation — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Gearshift patterns — Manual transmissions with power-assisted gearchange and automatic transmissions with manual-gearshift mode
|
95.99 | |
Commercial vehicles — Obstacle detection device during reversing — Requirements and tests
|
95.99 | |
Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method
|
95.99 | |
Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 1: Test method — Technical Corrigendum 1
|
95.99 | |
Diesel fuel — Assessment of lubricity using the high-frequency reciprocating rig (HFRR) — Part 2: Limit
|
95.99 | |
Road vehicles — Direction-of-motion stereotypes for automotive hand controls
|
95.99 | |
Road vehicles — Symbols for electrotechnical diagrams
|
95.99 | |
Diesel engines — Cleanliness assessment of fuel injection equipment
|
95.99 | |
Road vehicles - Injury risk curves for evaluation of occupant protection in side impact
|
95.99 | |
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 1: Definitions, symbols and general considerations
|
95.99 | |
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 2: Definition of impact conditions in relation to accident data
|
95.99 | |
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 3: Anthropometric impact dummy
|
95.99 | |
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 4: Variables to be measured, instrumentation and measurement procedures
|
95.99 | |
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 5: Injury indices and risk/benefit analysis
|
95.99 | |
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 6: Full-scale impact-test procedures
|
95.99 | |
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests
|
95.99 | |
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 8: Documentation and reports
|
95.99 | |
Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions
|
95.99 | |
Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions — Technical Corrigendum 1
|
95.99 | |
Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions
|
95.99 | |
Diesel fuel and petrol filters for internal combustion engines — Initial efficiency by particule counting retention capacity and gravimetric efficiency
|
95.99 | |
Diesel fuel and petrol filters for internal combustion engines — Initial efficiency by particule counting
|
95.99 | |
Road vehicles — Data exchange format for impact tests
|
95.99 | |
Road vehicles — Multimedia data exchange format for impact tests
|
95.99 | |
Diesel engines — Procedure for checking the dynamic timing of diesel fuel injection equipment — Part 1: Preconditioning
|
95.99 | |
Diesel engines — Procedure for checking the dynamic timing of diesel fuel injection equipment — Part 2: Test method
|
95.99 | |
Diesel engines — Procedure for checking the dynamic timing of diesel fuel injection equipment — Part 3: Validation of timing measurement devices
|
95.99 | |
Road vehicles — Test method for the quantification of on-centre handling — Part 1: Weave test
|
95.99 | |
Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 2: Non-threaded (push-on) connections
|
95.99 | |
Road vehicles — Unified diagnostic services (UDS) — Part 1: Specification and requirements
|
95.99 | |
Road vehicles — Diagnostic systems — Diagnostic services specification
|
95.99 | |
Road vehicles — Spark-plugs — Terminals
|
95.99 | |
Road vehicles — Round, screened and unscreened 60 V and 600 V multi-core sheathed cables — Test methods and requirements for basic and high-performance cables
|
95.99 | |
Road vehicles — Round, unscreened 60 V and 600 V multicore sheathed cables — Test methods and requirements for basic and high performance cables
|
95.99 | |
Road vehicles — Test procedures for evaluating child restraint system interactions with deploying air bags
|
95.99 | |
Road vehicles — Heavy commercial vehicles and buses — Steady-state circular tests
|
95.99 | |
Road vehicles — Heavy commercial vehicles and buses — Lateral transient response test methods
|
95.99 | |
Heavy commercial vehicles and buses — Braking in a turn — Open-loop test methods
|
95.99 | |
Road vehicles — Test procedures for evaluating occupant interactions with deploying side impact airbags
|
95.99 | |
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and compliance procedures for in-vehicle auditory presentation
|
95.99 | |
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 1: Definitions and parameters
|
95.99 | |
Road vehicles — Measurement of driver visual behaviour with respect to transport information and control systems — Part 2: Equipment and procedures
|
95.99 | |
Road vehicles — Ergonomic aspects of transport information and control systems — Specifications and compliance procedures for in-vehicle visual presentation
|
95.99 | |
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 1: General information
|
95.99 | |
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 2: Terms, definitions, abbreviations and acronyms
|
95.99 | |
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 4: External test equipment
|
95.99 | |
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 5: Emissions-related diagnostic services
|
95.99 | |
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 6: Diagnostic trouble code definitions
|
95.99 | |
Road vehicles — Communication between vehicle and external equipment for emissions-related diagnostics — Part 7: Data link security
|
95.99 | |
Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars
|
95.99 | |
Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 2: Performance and general test methods
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 3: Check valve
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 4: Manual valve
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual cylinder valve
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 6: Automatic valve
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 9: Pressure regulator
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 13: Pressure relief device (PRD)
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 14: Excess flow valve
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 16: Rigid fuel line
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 17: Flexible fuel line
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 18: Filter
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel system components — Part 19: Fittings
|
95.99 | |
Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements
|
95.99 | |
Road vehicles — Diagnostics on Controller Area Networks (CAN) — Part 1: General information
|
95.99 | |
Road vehicles — Diagnostics on Controller Area Networks (CAN) — Part 2: Network layer services
|
95.99 | |
Road vehicles — Diagnostics on Controller Area Networks (CAN) — Part 4: Requirements for emissions-related systems
|
95.99 | |
Road vehicles — Side impact test procedures for the evaluation of occupant interactions with side airbags by pole impact simulation
|
95.99 | |
Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 1: Terminology and rationale
|
95.99 | |
Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 2: Mechanical subsystems
|
95.99 | |
Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side-impact dummy — Part 3: Electronic subsystems
|
95.99 | |
Road vehicles — Design and performance specifications for the WorldSID 50th percentile male side impact dummy — Part 4: User's manual
|
95.99 | |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 1: General description, basic requirements
|
95.99 | |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 2: Visibility
|
95.99 | |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 3: Information devices and controls
|
95.99 | |
Road vehicles — Ergonomic requirements for the driver's workplace in line-service buses — Part 4: Cabin environment
|
95.99 | |
Heavy commercial vehicles and buses — Steady-state rollover threshold — Tilt-table test method
|
95.99 | |
Road vehicles — Data cables — Test methods and requirements
|
95.99 | |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 1: General
|
95.99 | |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads
|
95.99 | |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads
|
95.99 | |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 2: Electrical loads
|
95.99 | |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads
|
95.99 | |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads
|
95.99 | |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads
|
95.99 | |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads
|
95.99 | |
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 5: Chemical loads
|
95.99 | |
Road vehicles — Tachograph systems — Part 1: Electrical connectors
|
95.99 | |
Road vehicles — Tachograph systems — Part 1: Electrical connectors — Technical Corrigendum 1
|
95.99 | |
Road vehicles — Tachograph systems — Part 2: Recording unit, electrical interface
|
95.99 | |
Passenger cars — Free-steer behaviour — Part 1: Steering-release open-loop test method
|
95.99 | |
Passenger cars — Free-steer behaviour — Part 2: Steering-pulse open-loop test method
|
95.99 | |
Internal combustion engines — Piston pins — Part 1: General specifications
|
95.99 | |
Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 1: Pocket interface definition
|
95.99 | |
Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 2: Test methods and general performance requirements
|
95.99 | |
Road vehicles — Connection interface for pyrotechnic devices, two-way and three-way connections — Part 3: Pyrotechnic device and harness connector assembly - type 1
|
95.99 | |
Road vehicles — Test method for the quantification of on-centre handling — Determination of dispersion metrics for straight-line driving
|
95.99 | |
Road vehicles — H-point machine (HPM II) — Specifications and procedure for H-point determination
|
95.99 | |
Road vehicles — Degrees of protection (IP-Code) — Protection of electrical equipment against foreign objects, water and access
|
95.99 | |
Road vehicles — In-vehicle Ethernet — Part 1: General information and definitions
|
60.60 | |
Road vehicles — In-vehicle Ethernet — Part 2: Common physical entity requirements
|
60.60 | |
Road vehicles — In-vehicle Ethernet — Part 3: Optical 1-Gbit/s physical entity requirements and conformance test plan
|
60.60 | |
Road vehicles — In-vehicle Ethernet — Part 4: General requirements and test methods of optical gigabit Ethernet components
|
60.60 | |
Road vehicles — In-vehicle Ethernet — Part 5: Optical 1-Gbit/s physical layer system requirements and test plans
|
60.60 | |
Road vehicles — In-vehicle Ethernet — Part 6: Electrical 100-Mbit/s physical entity requirements and conformance test plan
|
60.60 | |
Road vehicles — In-vehicle Ethernet — Part 8: Electrical 100-Mbit/s Ethernet transmission media, components and tests
|
90.92 | |
Road vehicles — In-vehicle Ethernet — Part 10: Transport layer and network layer conformance test plans
|
60.60 | |
Road vehicles — In-vehicle Ethernet — Part 11: Application layer to session layer conformance test plans
|
60.60 | |
Road vehicles — (EMC) guidelines for installation of aftermarket radio frequency transmitting equipment
|
95.99 | |
Road vehicles — Holding test of coatings influencing the colour of light emitted by light source(s) — Test methods
|
95.99 | |
Diesel engines — NOx reduction agent AUS 32 — Part 1: Quality requirements
|
95.99 | |
Diesel engines — NOx reduction agent AUS 32 — Part 2: Test methods
|
95.99 | |
Road vehicles — Recyclability and recoverability — Calculation method
|
90.93 | |
Road vehicles — Modular vehicle communication interface (MVCI) — Part 3: Diagnostic server application programming interface (D-Server API)
|
95.99 | |
Fuel cell road vehicles — Safety specifications — Part 1: Vehicle functional safety
|
95.99 | |
Fuel cell road vehicles — Safety specifications — Part 2: Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen
|
95.99 | |
Fuel cell road vehicles — Safety specifications — Part 3: Protection of persons against electric shock
|
95.99 | |
Hybrid-electric road vehicles — Exhaust emissions and fuel consumption measurements — Non-externally chargeable vehicles
|
95.99 | |
Fuel cell road vehicles - Energy consumption measurement — Vehicles fuelled with compressed hydrogen
|
95.99 | |
Road vehicles — Implementation of WWH-OBD communication requirements — Part 1: General information and use case definition
|
95.99 | |
Road vehicles — Implementation of WWH-OBD communication requirements — Part 2: Common emissions-related data dictionary
|
95.99 | |
Road vehicles — Implementation of WWH-OBD communication requirements — Part 3: Common message dictionary
|
95.99 | |
Road vehicles — Implementation of WWH-OBD communication requirements — Part 4: Connection between vehicle and test equipment
|
95.99 | |
Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions
|
95.99 | |
Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions — Technical Corrigendum 1
|
95.99 |
No matching records found. Please try changing the filter settings.