Reference number
ISO/IEC 10373-3:2018
International Standard
ISO/IEC 10373-3:2018
Identification cards — Test methods — Part 3: Integrated circuit cards with contacts and related interface devices
Edition 3
2018-09
Preview
ISO/IEC 10373-3:2018
74238
недоступно на русском языке
Опубликовано (Версия 3, 2018)
Последний раз этот публикация был пересмотрен в  2024. Поэтому данная версия остается актуальной.

ISO/IEC 10373-3:2018

ISO/IEC 10373-3:2018
74238
Язык
Формат
CHF 173
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document defines test methods for characteristics of integrated circuit cards with contacts and related interface devices according to the definition given in ISO/IEC 7816-3. Each test method is cross‑referenced to one or more base standards, which can be ISO/IEC 7810 that defines the information storage technologies employed in identification card applications.

NOTE Criteria for acceptability do not form part of this document but can be found in the International Standards mentioned above.

This document defines test methods which are specific to integrated circuit technology with contacts. ISO/IEC 10373-1 defines test methods which are common to one or more card technologies and other parts of the ISO/IEC 10373 series define other technology‑specific tests.

Test methods defined in this document are intended to be performed separately and independently. A given card is not required to pass through all the tests sequentially. The test methods defined in this document are based on ISO/IEC 7816-3.

Conformance of cards and IFDs determined using the test methods defined in this document does not preclude failures in the field. Reliability testing is outside the scope of this document.

This document does not define any test to establish the complete functioning of integrated circuit cards. The test methods require only that the minimum functionality be verified. The minimum functionality is defined as follows.

— Any integrated circuit present in the card continues to show an Answer to Reset response which conforms to the base standard.

— Any contacts associated with any integrated circuit present in the card continue to show electrical resistance which conforms to the base standard.

Общая информация

  •  : Опубликовано
     : 2018-09
    : Подтверждение действия международного стандарта [90.93]
  •  : 3
  • ISO/IEC JTC 1/SC 17
    35.240.15 
  • RSS обновления

Жизненный цикл

Цели в области устойчивого развития

Данный стандарт разработан для достижения следующих Цель устойчивого развития

Появились вопросы?

Ознакомьтесь с FAQ