International Standard
ISO 636:2017
Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
Reference number
ISO 636:2017
Версия 5
2017-06
© ISO 2024
International Standard
Предпросмотр
недоступно на русском языке
Опубликовано (Версия 5, 2017)

ISO 636:2017

Формат
Язык
CHF 96
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

ISO 636:2017 specifies requirements for classification of rods and wires in the as-welded condition and in the post-weld heat-treated condition for tungsten inert gas welding of non-alloy and fine-grain steels with a minimum yield strength of up to 500 MPa or a minimum tensile strength of up to 570 MPa.

ISO 636:2017 is a combined specification providing classification utilizing a system based upon the yield strength and the average impact energy of 47 J of all-weld metal or utilizing a system based upon the tensile strength and the average impact energy of 27 J of all-weld metal.

a) Paragraphs and tables which carry the suffix letter "A" are applicable only to rods and wires classified to the system based upon the yield strength and the average impact energy of 47 J of all-weld metal in accordance with this document.

b) Paragraphs and tables which carry the suffix letter "B" are applicable only to rods and wires classified to the system based upon the tensile strength and the average impact energy of 27 J of all-weld metal in accordance with this document.

c) Paragraphs and tables which have neither the suffix letter "A" nor the suffix letter "B" are applicable to all rods and wires classified in accordance with this document.

Общая информация

  • Текущий статус
     : Опубликовано
    Дата публикации
     : 2017-06
    Этап
    : Между-народный стандарт подлежит пересмотру [90.92]
  • Версия
     : 5
  • Технический комитет :
    ISO/TC 44/SC 3
    ICS :
    25.160.20 
  • RSS обновления

Новая версия в процессе разработки

Draft International Standard
ISO/DIS 636
Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification
Reference number
ISO/DIS 636
Версия 1
© ISO 2024
Draft
International Standard
Предпросмотр

ISO/DIS 636

Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification

ISO/DIS 636

Формат
Язык
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)

  2. Интернет-магазин
  3. Каталог стандартов
  4. ТК
  5. ISO/TC 44/SC 3
  6. ISO 636:2017