ISO 4586-1:2004
High-pressure decorative laminates — Sheets made from thermosetting resins — Part 1: Classification and specifications
Reference number
ISO 4586-1:2004
Версия 5
В время отменен
ISO 4586-1:2004
Отозвано (Версия 5, 2004)


ISO 4586-1:2004 establishes a classification system for high-pressure decorative laminated sheets according to their performance and main recommended fields of application, including materials with special characteristics, for example postformability or defined reaction to fire.

It also specifies requirements on the properties of the various types of laminate covered by this classification. These materials are characterized by their decorative surfaces, which are relatively hard and resistant to wear, scratching, impact, boiling water, domestic stains and moderate heat. They are intended for interior applications as follows:

  1. thin single-faced laminates usually less than 2 mm thick, for bonding to a substrate;
  2. compact laminates, single- or double-faced, approximately 2 mm to 5 mm thick, which need to be rigidly supported without necessarily being bonded to a substrate;
  3. compact laminates, self-supporting, double-faced, usually thicker than 5 mm, the thickness of which will be selected according to application and panel dimensions.

Общая информация

  •  : Отозвано
     : 2004-11
    : Отмена международного стандарта [95.99]
  •  : 5
  • ISO/TC 61/SC 11
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ

Работа с клиентами
+41 22 749 08 88

Часы работы:
Понедельник – пятница: 09:00-12:00, 14:00-17:00 (UTC+1)