Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings — Oven test — Test method and basic specifications

Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 3: Preparation of components

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies

Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method

Thermoplastics pipes for the conveyance of fluids — Resistance to internal pressure — Test method — Technical Corrigendum 1

Unplasticized polyvinyl chloride (PVC) moulded fittings for elastic sealing ring type joints for use under pressure — Pressure-resistance test

Unplasticized polyvinyl chloride (PVC) injection-moulded solvent-welded socket fittings for use with pressure pipe — Hydraulic internal pressure test

Thermoplastics pipes — Longitudinal reversion — Part 1: Determination methods

Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters

Thermoplastics pipes — Longitudinal reversion — Part 2: Determination parameters — Technical Corrigendum 1

Unplasticized polyvinyl chloride (PVC) pipes — Longitudinal reversion — Test methods and specification

Thermoplastics pipes — Longitudinal reversion — Test method and parameters

Thermoplastics pipes — Longitudinal reversion — Test method and parameters

Polyethylene pipes (PE) — Longitudinal reversion — Test methods and specification

Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method

Thermoplastics pipes and fittings — Vicat softening temperature — Part 1: General test method

Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes

Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes

Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

Thermoplastics pipes and fittings — Vicat softening temperature — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and fittings

Unplasticized polyvinyl chloride (PVC) pipes and fittings — Vicat softening temperature — Test method and specification

Thermoplastics pipes and fittings - Vicat softening temperature: General test method and test conditions for Vinyl chloride - based (PVC-U, PVC-C, PVC-Hi) and Acryl nitrile - based (ABS, ASA) Pipes and Fittings

Unplasticized polyvinyl chloride (PVC) pipes — Water absorption — Determination and specification

Unplasticized polyvinyl chloride (PVC) pipes for potable water supply — Extractability of lead and tin — Test method

Plastics pipes — Measurement of dimensions

Plastics piping systems — Plastics components — Determination of dimensions

Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method

Polypropylene pipes — Burst test requirements

Polypropylene (PP) pipes — Effect of time and temperature on expected strength

Polypropylene (PP) pipes — Effect of time and temperature on the expected strength

Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure

Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure

Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure

Unplasticized polyvinyl chloride (PVC) pipes — Specification and determination of resistance to acetone

Unplasticized polyvinyl chloride (PVC) pipes — Effect of sulphuric acid — Requirement and test method

Unplasticized polyvinyl chloride (PVC) pipes — Specification and measurement of opacity

Polypropylene (PP) pipes and fittings — Density — Determination and specification

Polypropylene (PP) pipes — Maximum permissible longitudinal reversion

Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force

Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force

Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending

Chlorinated polyvinyl chloride (CPVC) pipes and fittings — Specification and determination of density

Polyethylene (PE) pipes — Pressure drop in mechanical pipe-jointing systems — Method of test and requirements

Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength

Polyvinylidene fluoride (PVDF) — Effect of time and temperature on expected strength

Polysulfone (PSU) — Effect of time and temperature on expected strength

Polysulfone (PSU) — Effect of time and temperature on expected strength

Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength

Polyphenylsulphone (PPSU) — Effect of time and temperature on expected strength

Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of density

Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 1: Test method

Thermoplastics pipes and fittings — Determination of melt mass-flow rate — Part 2: Test conditions

Polyethylene (PE) pipes and fittings — Determination of reference density of uncoloured and black polyethylenes

Thermoplastics pipes — Determination of tensile properties — Part 1: General test method

Thermoplastics pipes — Determination of tensile properties — Part 1: General test method

Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)

Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)

Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes

Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes

Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method and basic specification

Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method

Unplasticized polyvinyl chloride (PVC-U) pipes for drinking water supply — Extractability of cadmium and mercury occurring as impurities

Pipes and fittings of acrylonitrile/butadiene/styrene (ABS) — General specification for moulding and extrusion materials

Pipes and fittings of acrylonitrile/styrene/acrylester (ASA) — General specification for moulding and extrusion materials

Adhesives with solvents for assembly of PVC-U pipe elements — Characterization — Part 1: Basic test methods

Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane test

Plastics pipes and fittings — Opacity — Test method

Plastics pipes and fittings — Determination of opacity

Unplasticized polyamide (PA-U) pipes — Effect of time and temperature on the expected strength

Unplasticized polyamide (PA-U) pipes — Effect of time and temperature on the expected strength)

Thermoplastics pipes and fittings — Water absorption — Part 1: General test method

Thermoplastics pipes and fittings — Water absorption — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings

Thermoplastics pipes and fittings — Water absorption — Part 3: Test conditions for acrylonitrile/butadiene/styrene (ABS) pipes and fittings

Plastics pipes for the transport of water intended for human consumption — Extractability of constituents — Test method

Plastics piping systems for the conveyance of water intended for human consumption — Migration assessment — Determination of migration values for plastics pipes

Plastics piping systems for the transport of water intended for human consumption — Migration assessment — Determination of migration values of plastics pipes and fittings and their joints

Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials

Thermoplastics pipes for the transport of fluids — Methods of extrapolation of hydrostatic stress rupture data to determine the long-term hydrostatic strength of thermoplastics pipe materials — Technical Corrigendum 1

Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

Adhesives for thermoplastic piping systems — Part 1: Determination of film properties

Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength

Adhesives for thermoplastic piping systems — Part 2: Determination of shear strength

Adhesives for thermoplastic piping systems — Part 3: Test method for the determination of resistance to internal pressure

Polyolefin pipe assemblies with or without jointed fittings — Resistance to internal pressure — Test method

Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method

Unplasticized poly(vinyl chloride) (PVC-U) pipes — Dichloromethane resistance at specified temperature (DCMT) — Test method

Injection-moulded unplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems — Crushing test

Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 1: General test method

Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 1: General test method

Thermoplastics pipes for the transport of fluids — Determination of pendulum impact strength by the Charpy method — Part 2: Test conditions for pipes of various materials

Thermoplastics pipes for the transport of fluids — Determination of Charpy impact properties — Part 2: Test conditions for pipes of various materials

Thermoplastics pipes — Determination of creep ratio

Thermoplastics pipes — Determination of creep ratio

Thermoplastics pipes — Determination of creep ratio

Thermoplastics pipes — Determination of ring stiffness

Thermoplastics pipes — Determination of ring stiffness

Thermoplastics pipes — Determination of ring stiffness

Crosslinked polyethylene (PE-X) pipes — Effect of time and temperature on the expected strength

Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength

Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content

Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content

Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content — Amendment 1

Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content

Thermoplastics pipes — Determination of resistance to external blows — Staircase method

Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting

Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting

Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting

Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

Method for the assessment of the degree of carbon black dispersion in polyolefin pipes, fittings and compounds

Fusion compatibility of polyethylene (PE) pipes and fittings

Unplasticized poly(vinyl chloride) (PVC-U) pressure pipes — Determination of the fracture toughness properties

Structured-wall thermoplastics pipes — Oven test

Fittings, valves and other piping system components made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly(vinyl chloride) (PVC-C), acrylonitrile-butadiene-styrene (ABS) and acrylonitrile-styrene-acrylester (ASA) for pipes under pressure — Resistance to internal pressure — Test method

Thermoplastics materials for pipes and fittings for pressure applications — Classification and designation — Overall service (design) coefficient

Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient

Polybutene (PB) pipes — Effect of time and temperature on the expected strength

Polybutene-1 (PB-1) pipes — Effect of time and temperature on the expected strength

Plastics piping systems — Pressure systems for hot and cold water — Test method for leaktightness under vacuum

Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)

Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Small-scale steady-state test (S4 test)

Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)

Thermoplastics pipes for the conveyance of fluids — Determination of resistance to rapid crack propagation (RCP) — Full-scale test (FST)

Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes (notch test)

Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes

Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes

Polyethylene pipes — Resistance to slow crack growth — Cone test method

Plastics pipes for the conveyance of fluids under pressure — Miner's rule — Calculation method for cumulative damage

Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C

Plastics pipes and fittings — Pressure reduction factors for polyethylene pipeline systems for use at temperatures above 20 degrees C

Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pressure pipes — Test method for leaktightness under negative pressure, angular deflection and deformation

Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with plastic pipes — Test method for leaktightness under negative pressure, angular deflection and deformation

Plastics piping systems — Elastomeric-sealing-ring-type socket joints for use with thermoplastic pressure pipes — Test method for leaktightness under internal pressure and with angular deflection

Plastics pipes and fittings — Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles

Method for the assessment of the degree of pigment dispersion in polyolefin pipes, fittings and compounds

Plastics piping systems — Test method for the resistance of polyolefin pipe/pipe or pipe/fitting assemblies to tensile loading

Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading

Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint — Amendment 1

Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm — Amendment 1

Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies

Plastics pipes and fittings — Crushing decohesion test for polyethylene (PE) electrofusion assemblies — Amendment 1

Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test

Plastics pipes and fittings — Decohesion test of polyethylene (PE) saddle fusion joints — Evaluation of ductility of fusion joint interface by tear test

Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance

Thermoplastics fittings — Determination of ring stiffness

Thermoplastics fittings — Determination of ring stiffness

Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility

Plastics piping and ducting systems — Thermoplastics pipes — Determination of ring flexibility

Thermoplastics materials — Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding

Adhesives for thermoplastic piping systems — Test method for the determination of thermal stability of adhesives

Plastic pipes and fittings-de-cohesion test of butt fusion assemblies-Strip bend test

Notch tensile test to measure the resistance to slow crack growth of polyethylene materials for pipe and fitting products (PENT)

Thermoplastics pipes for the conveyance of fluids — Determination of the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT)

Plastics piping and ducting systems — Plastics pipes and fittings — Method for exposure to direct (natural) weathering

Plastics pipes and fittings — Definitions of types of test

Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing

Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene electrofusion socket joints using phased array ultrasonic testing

Plastics piping systems — Multilayer pipes — Test method for the adhesion of the different layers using a pulling rig

Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe

Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe — Technical Corrigendum 1

Plastics piping systems — Multilayer pipes — Determination of long-term strength

Plastics piping systems — Fittings, valves and ancillaries — Determination of gaseous flow rate/pressure drop relationships

Plastics piping systems — Multilayer M (metal) pipes — Test method for strength of the weld line in the metal layer and bonding between layers by use of a cone

Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 1: Measurement of the processing temperature

Rigid PVC pipes — Differential scanning calorimetry (DSC) method — Part 2: Measurement of the enthalpy of fusion of crystallites

Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method

Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method

Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method

Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method

Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds — Amendment 1

Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds

Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of joints to pressure cycling

Plastics piping systems — Thermoplastics pipes and fittings for hot and cold water — Test method for the resistance of mounted assemblies to temperature cycling

Plastics piping systems — Polyolefin pipes and mechanical fitting assemblies — Test method for the resistance to end load (AREL test)

Plastics pipes and fittings — Format of a technical file for characterizing PE spigot end fittings

Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test

Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test

Polyethylene (PE) materials for piping systems — Determination of the resistance to point loads — Test method

Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing

Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using phased array ultrasonic testing

Thermoplastics pipes for the conveyance of fluids — Determination of the stress-rupture resistance of moulding materials using plain strain grooved tensile (PSGT) specimens

Pipes made of raised-temperature-resistance polyethylene (PE-RT) — Effect of time and temperature on the expected strength

Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength

Polyethylene of raised temperature resistance (PE-RT) pipes — Effect of time and temperature on the expected strength

Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using time of flight diffraction testing

Thermoplastic pipes for the conveyance of fluids — Inspection of polyethylene butt fusion joints using time of flight diffraction testing

Plastics piping systems — Determination of metal migration values of plastic pipes, fittings and their joints.

Plastics pipes and fittings — Definition and construction procedures for reference lines