Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Two-electrode method using acetic acid to measure pitting potential of aluminium and aluminium alloys in chloride solutions
|
60.60 | ISO/TC 156 |
Austenitic stainless steels — Determination of resistance to intergranular corrosion — Part 1: Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
|
95.99 | ISO/TC 17/SC 7 |
Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
|
90.93 | ISO/TC 156 |
Austenitic stainless steels — Determination of resistance to intergranular corrosion — Part 2: Corrosion test in a sulphuric acid/copper sulphate medium in the presence of copper turnings (Monypenny Strauss test)
|
95.99 | ISO/TC 17/SC 7 |
Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid
|
90.93 | ISO/TC 156 |
Determination of resistance to intergranular corrosion of stainless steels — Part 3: Corrosion test for low-Cr ferritic stainless steels
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Method of oxalic acid etching test for intergranular corrosion of austenitic stainless steel
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Test method for high-temperature corrosion testing of metallic materials by thermogravimetry under isothermal or cyclic conditions
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion potential (E-CLCP) for Ti alloys fabricated via additive manufacturing method in simulated biomedical solutions
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Uniaxial constant-load test method for evaluating susceptibility of metals and alloys to stress corrosion cracking in high-purity water at high temperatures
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Electrochemical test methods for high-temperature corrosion testing of metallic materials in molten salts
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion test method for disinfectant — Total immersion method
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Guidelines and requirements for corrosion testing in simulated environment of deep-sea water
|
60.60 | ISO/TC 156 |
Corrosion of Metals and Alloys — Test and evaluation method for the corrosion of steel bar embedded in concrete structure exposed to total corrosion zones in marine environments
|
40.93 | ISO/TC 156 |
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 1: Test method
|
90.20 | ISO/TC 156 |
Corrosion of metals and alloys — Determination of dezincification resistance of copper alloys with zinc — Part 2: Assessment criteria
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Determination of dezincification resistance of brass
|
95.99 | ISO/TC 156 |
Copper alloys — Ammonia test for stress corrosion resistance
|
90.93 | ISO/TC 26 |
Corrosion of metals and alloys — Wiping method for measurements of gases and particles on real structures and equipment
|
50.20 | ISO/TC 156 |
Corrosion tests in artificial atmosphere — General requirements
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Determination of bimetallic corrosion in outdoor exposure corrosion tests
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Determination of bimetallic corrosion in atmospheric exposure corrosion tests
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 1: General guidance on testing procedures
|
90.60 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 2: Preparation and use of bent-beam specimens
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 3: Preparation and use of U-bend specimens
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 4: Preparation and use of uniaxially loaded tension specimens
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 5: Preparation and use of C-ring specimens
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of pre-cracked specimens for tests under constant load or constant displacement
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement
|
90.60 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement — Amendment 1
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 7: Slow strain rate testing
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 7: Method for slow strain rate testing
|
90.20 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 8: Preparation and use of specimens to evaluate weldments
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 10: Reverse U-bend method
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Stress corrosion testing — Part 12: Requirements for atmospheric stress corrosion cracking testing
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Overview of metal corrosion protection when using disinfectants
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Terms and definitions
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Vocabulary
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Vocabulary — Amendment 1
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Basic terms and definitions
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Basic terms and definitions
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Vocabulary
|
90.92 | ISO/TC 156 |
Corrosion of metals and alloys — Vocabulary
|
50.00 | ISO/TC 156 |
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Removal of corrosion products from corrosion test specimens — Amendment 1
|
40.99 | ISO/TC 156 |
Corrosion of metals and alloys — Exposure test results in the Asian Monsoon region
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Reference data for ISO 16539:2013, Method B
|
20.00 | ISO/TC 156 |
Metals and alloys — Atmospheric corrosion testing — General requirements for field tests
|
95.99 | ISO/TC 156 |
Metals and alloys — Atmospheric corrosion testing — General requirements
|
90.93 | ISO/TC 156 |
Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Chart method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Chart method
|
90.93 | ISO/TC 79/SC 2 |
Anodized aluminium and aluminium alloys — Rating system for the evaluation of pitting corrosion — Grid method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method
|
95.99 | ISO/TC 79/SC 2 |
Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method
|
90.93 | ISO/TC 79/SC 2 |
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosivity of atmospheres — Classification, determination and estimation
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosivity of atmospheres — Guiding values for the corrosivity categories
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of pollution
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosivity of atmospheres — Measurement of environmental parameters affecting corrosivity of atmospheres
|
90.92 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosivity of atmospheres — Determination of corrosion rate of standard specimens for the evaluation of corrosivity
|
90.93 | ISO/TC 156 |
Corrosion tests in artificial atmospheres — Salt spray tests
|
95.99 | ISO/TC 156 |
Corrosion tests in artificial atmospheres — Salt spray tests
|
95.99 | ISO/TC 156 |
Corrosion tests in artificial atmospheres — Salt spray tests
|
95.99 | ISO/TC 156 |
Corrosion tests in artificial atmospheres — Salt spray tests
|
95.99 | ISO/TC 156 |
Corrosion tests in artificial atmospheres — Salt spray tests
|
60.60 | ISO/TC 156 |
Corrosion tests in artificial atmospheres — Salt spray tests — Amendment 1: Footnote of Warning
|
60.60 | ISO/TC 156 |
Corrosion of Metals and Alloys — Testing method for corrosion resistance for hafnium in the high temperature and pressure
|
40.00 | ISO/TC 156 |
Galvanic anodes for cathodic protection in seawater and saline sediments
|
50.00 | ISO/TC 156 |
Nickel-based alloys — Determination of resistance to intergranular corrosion
|
90.93 | ISO/TC 156 |
Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
|
95.99 | ISO/TC 156 |
Corrosion of aluminium alloys — Determination of resistance to stress corrosion cracking
|
90.20 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion test method for disinfectant — Spray test method
|
50.20 | ISO/TC 156 |
Corrosion of metals and alloys — Performance test method for corrosion inhibitors used in chemical cleaning of industry equipment
|
60.60 | ISO/TC 156 |
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
|
95.99 | ISO/TC 156 |
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
|
95.99 | ISO/TC 156 |
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
|
60.60 | ISO/TC 156 |
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) — Amendment 1: Footnote of Warning
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors — Technical Corrigendum 1
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Aqueous corrosion testing of zirconium alloys for use in nuclear power reactors
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Alternate immersion test in salt solution
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Alternate immersion test in salt solution
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Alternate immersion test in salt solution
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Guidelines for selection of protection methods against atmospheric corrosion
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Guidelines for exposing and evaluating metals and alloys in surface sea water
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Evaluation of pitting corrosion
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Guidelines for the evaluation of pitting corrosion
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion tests in artificial atmosphere — Accelerated outdoor test by intermittent spraying of a salt solution (Scab test)
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion fatigue testing — Part 1: Cycles to failure testing
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion fatigue testing — Part 2: Crack propagation testing using precracked specimens — Amendment 1
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 1: Determination and estimation of indoor corrosivity
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 2: Determination of corrosion attack in indoor atmospheres
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Classification of low corrosivity of indoor atmospheres — Part 3: Measurement of environmental parameters affecting indoor corrosivity
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — General principles for corrosion testing
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — General principles for corrosion testing
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Exfoliation corrosion testing of aluminium alloys — Technical Corrigendum 1
|
60.60 | ISO/TC 156 |
General principles of cathodic protection in sea water
|
95.99 | ISO/TC 156 |
General principles of cathodic protection in seawater
|
90.60 | ISO/TC 156 |
Cathodic protection of steel in concrete
|
95.99 | ISO/TC 156 |
Cathodic protection of steel in concrete
|
95.99 | ISO/TC 156 |
Cathodic protection of steel in concrete
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Electrochemical potentiokinetic reactivation measurement using the double loop method (based on Cihal's method)
|
90.93 | ISO/TC 156 |
Cathodic protection of harbour installations
|
90.60 | ISO/TC 156 |
Corrosion of metals and alloys — Test method for thermal-cycling exposure testing under high-temperature corrosion conditions for metallic materials
|
90.60 | ISO/TC 156 |
Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
|
90.92 | ISO/TC 156 |
Corrosion of metals and alloys — Accelerated testing involving cyclic exposure to salt mist, dry and wet conditions
|
40.99 | ISO/TC 156 |
Corrosion of metals and alloys — Method of measuring the pitting potential for stainless steels by potentiodynamic control in sodium chloride solution
|
90.20 | ISO/TC 156 |
Cathodic protection — Competence levels of cathodic protection persons — Basis for a certification scheme
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Evaluation of stress corrosion cracking by the drop evaporation test
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Accelerated cyclic tests with exposure to acidified salt spray, "dry" and "wet" conditions
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Accelerated cyclic test with exposure to acidified salt spray, dry and wet conditions
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Guidelines for the selection of methods for particle-free erosion corrosion testing in flowing liquids
|
95.99 | ISO/TC 156 |
Overview of methods available for particle-free erosion corrosion testing in flowing liquids
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Test method for corrosion of materials by electrochemical impedance measurements
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion tests in artificial atmospheres — Guidelines for selection of accelerated corrosion test for product qualification
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process — "Dry" and "wet" conditions at constant absolute humidity
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Methodology for determining the resistance of metals to stress corrosion cracking using the four-point bend method
|
90.93 | ISO/TC 156 |
Corrosion control engineering life cycle of power transmission and transformation system — General requirements
|
40.00 | ISO/TC 156/SC 1 |
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
|
90.92 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion in artificial atmosphere — Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution
|
40.99 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
|
90.92 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 1: Guidelines and requirements for conducting pilot-scale evaluation of corrosion and fouling control additives for open recirculating cooling water systems
|
50.20 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
|
90.92 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosion and fouling in industrial cooling water systems — Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
|
50.20 | ISO/TC 156 |
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
|
95.99 | ISO/TC 156 |
Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique
|
90.20 | ISO/TC 156 |
Corrosion of metals and alloys — Guidelines for corrosion test by electrochemical noise measurements
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Conventions applicable to electrochemical measurements in corrosion testing
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Electrochemical test methods — Guidelines for conducting potentiostatic and potentiodynamic polarization measurements — Technical Corrigendum 1
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Determination of the critical pitting temperature under potientiostatic control
|
90.20 | ISO/TC 156 |
Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Method for determination of the uniform corrosion rate of stainless steels and nickel based alloys in liquids
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Crevice corrosion formers with disc springs for flat specimens or tubes made from stainless steel
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria
|
95.99 | ISO/TC 156 |
Corrosion of metals and alloys — Determination of AC corrosion — Protection criteria
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Determination of the critical crevice temperature (CCT) for stainless steels under potentiostatic control
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Monitoring method for corrosion states of stainless steel in industrial cooling water
|
40.00 | ISO/TC 156 |
Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 1: Application in concrete
|
90.60 | ISO/TC 156 |
Accelerated life test method of mixed metal oxide anodes for cathodic protection — Part 2: Application in soils and natural waters
|
90.60 | ISO/TC 156 |
Corrosion of metals and alloys — Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Corrosivity of atmospheres — Mapping areas of increased risk of corrosion
|
60.60 | ISO/TC 156 |
Corrosion of metal and alloys — Determination of resistance of magnesium alloys to stress corrosion cracking
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Determination of the corrosion rates of embedded steel reinforcement in concrete exposed to simulated marine environments
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Measurement of environmentally assisted small crack growth rate
|
90.93 | ISO/TC 156 |
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
|
95.99 | ISO/TC 156 |
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying — Technical Corrigendum 1
|
95.99 | ISO/TC 156 |
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
|
90.92 | ISO/TC 156 |
Corrosion tests in artificial atmospheres — Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying
|
40.20 | ISO/TC 156 |
Corrosion of metals and alloys — Guidelines for assessing the significance of stress corrosion cracks detected in service
|
90.60 | ISO/TC 156 |
Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels
|
90.93 | ISO/TC 156 |
Corrosion of metals and alloys — Electrochemical measurement of ion transfer resistance to characterize the protective rust layer on weathering steel
|
60.60 | ISO/TC 156 |
Assessment of the effectiveness of cathodic protection based on coupon measurements
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Sulfur dioxide test in a humid atmosphere (fixed gas method)
|
90.20 | ISO/TC 156 |
Corrosion of metals and alloys — Test method for measuring the stress corrosion crack growth rate of steels and alloys under static-load conditions in high-temperature water
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Electrochemical measurements — Test method for monitoring atmospheric corrosion
|
60.60 | ISO/TC 156 |
Guidelines of marine environment zonation for steel corrosion embedded in concrete
|
30.60 | ISO/TC 156 |
Corrosion of metals and alloys — Measurement of the electrochemical critical localized corrosion temperature (E-CLCT) for Ti alloys fabricated via the additive manufacturing method
|
60.60 | ISO/TC 156 |
Corrosion control engineering life cycle — General requirements
|
60.60 | ISO/TC 156/SC 1 |
Pipeline corrosion control engineering life cycle — General requirements
|
60.60 | ISO/TC 156/SC 1 |
Corrosion control engineering life cycle — Risk assessment
|
60.60 | ISO/TC 156/SC 1 |
Corrosion control engineering life cycle in nuclear power plants — General requirements
|
40.20 | ISO/TC 156/SC 1 |
Corrosion of metals and alloys — Guidelines for the corrosion testing of metals and alloys exposed in deep-sea water
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Multielectrode arrays for corrosion measurement
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Requirements for localised corrosion and environmentally assisted cracking testing of additively manufactured metals and alloys
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Rating method by appearance of rust and stains of atmospheric corrosion for stainless steels
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Standard test method for particle-free erosion corrosion of metallic materials by jet-in-slit
|
60.60 | ISO/TC 156 |
Corrosion control engineering life cycle in fossil fuel power plants — General requirements
|
60.60 | ISO/TC 156/SC 1 |
Cathodic protection of offshore wind structures
|
60.60 | ISO/TC 156 |
Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments
|
90.92 | ISO/TC 156 |
Corrosion of metals and alloys — Method for metallographic examination of samples after exposure to high-temperature corrosive environments
|
40.20 | ISO/TC 156 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.