Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Rotating tools with parallel shanks — Diameters of shanks and sizes of driving squares |
90.93 | ISO/TC 29/SC 9 |
Application of carbides for machining by chip removal — Designation of the main groups of chip removal and groups of application |
95.99 | ISO/TC 29/SC 9 |
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application |
95.99 | ISO/TC 29/SC 9 |
Application of hard cutting materials for machining by chip removal — Designation of the main groups of chip removal and groups of application — Technical Corrigendum 1 |
95.99 | ISO/TC 29/SC 9 |
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application |
95.99 | ISO/TC 29/SC 9 |
Classification and application of hard cutting materials for metal removal with defined cutting edges — Designation of the main groups and groups of application |
90.20 | ISO/TC 29/SC 9 |
Withdrawal of ISO/R 524-1966 |
95.99 | ISO/TC 29 |
Short machine taps and hand taps — Amendment 1 |
95.99 | ISO/TC 29 |
Indexable (throwaway) carbide inserts without fixation hole — Dimensions |
95.99 | ISO/TC 29 |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions |
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with rounded corners, without fixing hole — Dimensions |
90.93 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation |
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation |
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation — Amendment 1: Tolerance on d and m of V-shape inserts |
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation |
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation — Technical Corrigendum 1 |
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation |
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Designation |
90.93 | ISO/TC 29/SC 9 |
Tool shanks and equipment with 7/24 tapers — Collar dimensions |
95.99 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers |
90.93 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 1: Geometry of the active part of cutting tools — General terms, reference systems, tool and working angles, chip breakers — Amendment 1 |
60.60 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 2: Geometry of the active part of cutting tools — General conversion formulae to relate tool and working angles |
90.93 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting |
90.93 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 4: Forces, energy, power |
90.93 | ISO/TC 29 |
Basic quantities in cutting and grinding — Part 5: Basic terminology for grinding processes using grinding wheels |
90.93 | ISO/TC 29 |
Single point cutting tools — Corner radii |
95.99 | ISO/TC 29/SC 9 |
Single point cutting tools — Corner radii |
90.93 | ISO/TC 29/SC 9 |
Indexable (throwaway) carbide inserts with cylindrical fixation hole — Dimensions |
95.99 | ISO/TC 29 |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions |
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions |
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions |
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole — Dimensions |
90.93 | ISO/TC 29/SC 9 |
Indexable (throwaway) carbide inserts for milling cutters — Dimensions — Part 1: Square inserts |
95.99 | ISO/TC 29 |
Indexable (throwaway) hardmetal inserts for milling cutters — Dimensions — Part 2: Triangular inserts |
95.99 | ISO/TC 29 |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions |
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with wiper edges, without fixing hole — Dimensions |
90.60 | ISO/TC 29/SC 9 |
Parallel shank tools — Driving tenons and sockets — Dimensions |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 2: Style A |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 2: Style A |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 3: Style B |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 3: Style B |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 4: Style D |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 4: Style D |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 5: Style F |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 5: Style F |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 6: Style G |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 6: Style G |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 7: Style J |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 7: Style J |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 8: Style K |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 8: Style K |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 9: Style L |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 9: Style L |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 10: Style N |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 10: Style N |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 11: Style R |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 11: Style R |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 12: Style S |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 12: Style S |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 13: Style T |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 13: Style T |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 14: Style H |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 14: Style H |
90.93 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 15: Style V |
95.99 | ISO/TC 29/SC 9 |
Tool holders with rectangular shank for indexable inserts — Part 15: Style V |
90.93 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 1: General survey, correlation and determination of dimensions |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 2: Style F |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 3: Style G |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 4: Style J |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 5: Style K |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 6: Style L |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 7: Style R |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 8: Style S |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 9: Style T |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 10: Style U |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 11: Style W |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Part 12: Style Y |
90.60 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Dimensions |
95.99 | ISO/TC 29 |
Cartridges, type A, for indexable inserts — Dimensions — Addendum 1 |
95.99 | ISO/TC 29/SC 9 |
Cartridges, type A, for indexable inserts — Dimensions |
95.99 | ISO/TC 29/SC 9 |
Indexable hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 1: Dimensions of inserts with 7 degrees normal clearance |
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 2: Dimensions of inserts with 11 degrees normal clearance |
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Hardmetal (carbide) inserts with rounded corners, with partly cylindrical fixing hole — Part 3: V-shape inserts |
95.99 | ISO/TC 29/SC 9 |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions |
95.99 | ISO/TC 29/SC 9 |
Indexable hard material inserts with rounded corners, with partly cylindrical fixing hole — Dimensions |
90.60 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole |
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 1: Dimensions of inserts without fixing hole |
90.93 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole |
95.99 | ISO/TC 29/SC 9 |
Indexable inserts for cutting tools — Ceramic inserts with rounded corners — Part 2: Dimensions of inserts with cylindrical fixing hole |
90.93 | ISO/TC 29/SC 9 |
Dimensions of accessories for cutter arbors with parallel key and tenon drive |
90.93 | ISO/TC 29/SC 9 |
Classification and designation of approximate chip control zones for indexable inserts with chipbreakers |
90.93 | ISO/TC 29/SC 9 |
Cutting tools — Designation of high-speed steel groups |
95.99 | ISO/TC 29/SC 9 |
Cutting tools — Designation of high-speed steel groups |
90.60 | ISO/TC 29/SC 9 |
Applicability of hard cutting materials for machining by chip removal — Information additional to ISO 513 designation |
95.99 | ISO/TC 29/SC 9 |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Amendment 1 |
60.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 1 |
60.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 1: Overview, fundamental principles and general information model — Technical Corrigendum 2 |
60.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items — Technical Corrigendum 1 |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items |
60.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items — Technical Corrigendum 1 |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items |
60.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items — Technical Corrigendum 1 |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 4: Reference dictionary for adaptive items |
60.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items — Technical Corrigendum 1 |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 5: Reference dictionary for assembly items |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts — Technical Corrigendum 1 |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts |
90.20 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems — Technical Corrigendum 1 |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 60: Reference dictionary for connection systems |
90.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 70: Graphical data layout — Layer setting for tool layout |
90.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 71: Graphical data layout — Creation of documents for standardized data exchange: Graphical product information |
90.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 72: Creation of documents for the standardized data exchange — Definition of properties for drawing header and their XML-data exchange |
90.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 80: Creation and exchange of 3D models — Overview and principles |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries |
95.99 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries |
90.20 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries — Technical Corrigendum 1 |
60.60 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 150: Usage guidelines |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 201: Creation and exchange of 3D models — Regular inserts |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 202: Creation and exchange of 3D models — Irregular inserts |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 203: Creation and exchange of 3D models — Replaceable inserts for drilling |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 204: Creation and exchange of 3D models — Inserts for reaming |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 303: Creation and exchange of 3D models — Solid end mills |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 304: Creation and exchange of 3D models — Solid milling cutters with arbor hole |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 305: Creation and exchange of 3D models — Modular tooling systems with adjustable cartridges for boring |
90.20 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 306: Creation and exchange of 3D models — Drills and countersinking tools for indexable inserts |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 307: Creation and exchange of 3D models — End mills for indexable inserts |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 308: Creation and exchange of 3D models — Milling cutters with arbor hole for indexable inserts |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 309: Creation and exchange of 3D models — Tool holders for indexable inserts |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips |
90.20 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 311: Creation and exchange of 3D models — Solid reamers |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 312: Creation and exchange of 3D models — Reamers for indexable inserts |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 313: Creation and exchange of 3D models — Burrs |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 314: Creation and exchange of 3D models — Cartridges for indexable inserts |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 315: Creation and exchange of 3D models — Modelling of machine operated feed out tools |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 401: Creation and exchange of 3D models — Converting, extending and reducing adaptive items |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 403: Creation and exchange of 3D models — Modelling of driven tool units |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 405: Creation and exchange of 3D models — Collets |
90.93 | ISO/TC 29 |
Cutting tool data representation and exchange — Part 406: Creation and exchange of 3D models — Modelling of connection interface |
90.93 | ISO/TC 29 |
Balancing of rotating tools and tool systems |
90.60 | ISO/TC 29 |
Cubic boron nitride inserts, tipped or solid — Dimensions, types |
95.99 | ISO/TC 29/SC 9 |
Cubic boron nitride inserts, tipped or solid — Dimensions, types |
90.93 | ISO/TC 29/SC 9 |
Polycristalline diamond inserts, tipped — Dimensions, types |
95.99 | ISO/TC 29/SC 9 |
Polycristalline diamond inserts, tipped — Dimensions, types |
90.93 | ISO/TC 29/SC 9 |
CVD diamond tools — Categorization |
60.60 | ISO/TC 29/SC 9 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.