Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Reduction sleeves and extension sockets for tools with Morse taper shanks
|
95.99 | ISO/TC 29 |
Reduction sleeves and extension sockets for tools with Morse taper shanks
|
90.93 | ISO/TC 29/SC 9 |
Machine tools — Self-holding tapers for tool shanks
|
95.99 | ISO/TC 39 |
Machine tools — Self-holding tapers for tool shanks
|
90.60 | ISO/TC 29/SC 9 |
7/24 tapers for tool shanks for manual changing
|
95.99 | ISO/TC 39 |
7/24 tapers for tool shanks for manual changing
|
90.60 | ISO/TC 29/SC 9 |
Machine tool tables — T-slots and corresponding bolts
|
95.99 | ISO/TC 39 |
Machine tool tables — T-slots and corresponding bolts
|
90.93 | ISO/TC 39 |
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 1: Type A
|
95.99 | ISO/TC 39 |
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connection
|
95.99 | ISO/TC 39/SC 8 |
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 1: Conical connection
|
90.93 | ISO/TC 39/SC 8 |
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 2: Camlock type
|
95.99 | ISO/TC 39/SC 8 |
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type
|
90.93 | ISO/TC 39/SC 8 |
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type — Technical Corrigendum 1
|
60.60 | ISO/TC 39/SC 8 |
Machine tools — Spindle noses and face plates — Sizes for interchangeability — Part 3: Bayonet type
|
95.99 | ISO/TC 39/SC 8 |
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 3: Bayonet type
|
90.93 | ISO/TC 39/SC 8 |
Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 4: Cylindrical connection
|
90.93 | ISO/TC 39/SC 8 |
Milling machine arbors with 7/24 tapers — Part 1: Dimensions
|
95.99 | ISO/TC 29 |
Milling machine arbors with 7/24 tapers — Part 1: Dimensions and designation
|
90.93 | ISO/TC 29/SC 9 |
Milling machine arbors with 7/24 tapers — Part 2: Accessories
|
90.60 | ISO/TC 29/SC 9 |
Machine tools — Morse taper shanks — Cotter slots with taper keys
|
90.60 | ISO/TC 29/SC 9 |
Self centring, manually operated chucks for machine tools — Normal accuracy — Acceptance test specifications (geometrical tests)
|
95.99 | ISO/TC 39/SC 8 |
Self-centring manually-operated chucks for machine tools — Acceptance test specifications (geometrical tests)
|
95.99 | ISO/TC 39/SC 8 |
Machine tools — Test conditions for self-centring, manually operated chucks with one-piece jaws
|
90.93 | ISO/TC 39/SC 8 |
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 1: Manually operated chucks with tongue and groove type jaws
|
90.60 | ISO/TC 39/SC 8 |
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 2: Power-operated chucks with tongue and groove type jaws
|
90.93 | ISO/TC 39/SC 8 |
Machine tools — Dimensions and geometric tests for self-centring chucks with two-piece jaws — Part 3: Power-operated chucks with serrated jaws
|
90.93 | ISO/TC 39/SC 8 |
Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications
|
95.99 | ISO/TC 39 |
Self-centring chucks for machine tools with two-piece jaws (tongue and groove type) — Sizes for interchangeability and acceptance test specifications
|
95.99 | ISO/TC 39/SC 8 |
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
|
95.99 | ISO/TC 29 |
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
|
90.93 | ISO/TC 29/SC 9 |
Cutter arbors with tenon drive — Part 1: Dimensions of Morse taper
|
90.60 | ISO/TC 29/SC 9 |
Cutter arbors with tenon drive — Part 2: Dimensions of 7/24 taper
|
90.60 | ISO/TC 29/SC 9 |
Cutter arbors with tenon drive — Part 3: Dimensions of hollow taper interface with flange contact surface
|
90.60 | ISO/TC 29/SC 9 |
Cutter arbors with tenon drive — Dimensions
|
95.99 | ISO/TC 29 |
Cutter arbors with tenon drive — Dimensions
|
95.99 | ISO/TC 29 |
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
|
95.99 | ISO/TC 29 |
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
|
90.93 | ISO/TC 29/SC 9 |
Counterbores with Morse taper shanks and detachable pilots
|
95.99 | ISO/TC 29/SC 9 |
Counterbores with Morse taper shanks and detachable pilots
|
90.93 | ISO/TC 29/SC 9 |
Jig bushes and accessories for drilling purposes — Dimensions
|
95.99 | ISO/TC 29 |
Jig bushes — Definitions and nomenclature
|
90.99 | ISO/TC 29/SC 9 |
Machine tools — Positive drive of Morse tapers
|
95.99 | ISO/TC 29 |
Machine tools — Positive drive of Morse tapers
|
90.93 | ISO/TC 29/SC 9 |
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks
|
95.99 | ISO/TC 29 |
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 1: Dimensions of the driving system of tool shanks
|
95.99 | ISO/TC 29 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 1: Dimensions of the driving system of tool shanks
|
90.60 | ISO/TC 29/SC 9 |
Tool chucks (end mill holders) with clamp screws for flatted parallel shank tools — Part 2: Connecting dimensions of chucks
|
95.99 | ISO/TC 29 |
Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools — Part 2: Connecting dimensions of chucks and designation
|
90.60 | ISO/TC 29/SC 9 |
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
|
95.99 | ISO/TC 29 |
Reduction sleeves with 7/24 external and Morse internal taper and incorporated screw
|
90.93 | ISO/TC 29/SC 9 |
Polygonal turret interface with flat contact surface — Part 1: Shanks of type F, H and A
|
50.20 | ISO/TC 29/SC 9 |
Polygonal turret interface with flat contact surface — Part 2: Receivers of type F, H, A and X for shanks of type F, H and A
|
50.20 | ISO/TC 29/SC 9 |
Polygonal turret interface with flat contact surface — Part 3: Coupling for driven tool holders with shanks of type F and A
|
50.20 | ISO/TC 29/SC 9 |
Test conditions of mechanical dividing heads for machine tools — Testing of the accuracy
|
95.99 | ISO/TC 39 |
Acceptance conditions of mechanical dividing heads for machine tools — Testing of accuracy
|
90.93 | ISO/TC 39/SC 2 |
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions
|
95.99 | ISO/TC 29/SC 9 |
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Shanks Nos. 40, 45 and 50 — Dimensions — Addendum 1: Conicity tolerances
|
95.99 | ISO/TC 29 |
Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
|
90.93 | ISO/TC 29/SC 9 |
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Retention knobs for shanks Nos. 40, 45 and 50 — Dimensions and mechanical characteristics
|
95.99 | ISO/TC 29/SC 9 |
Tool shanks with 7/24 taper for automatic tool changers — Part 2: Dimensions and designation of shanks of forms J, JD and JF
|
90.93 | ISO/TC 29/SC 9 |
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
|
95.99 | ISO/TC 29/SC 9 |
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF
|
95.99 | ISO/TC 29 |
Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
|
90.60 | ISO/TC 29/SC 9 |
Conditions of acceptance and installation for work-holding fixed tables of machine tools
|
95.99 | ISO/TC 39/SC 2 |
7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF
|
90.93 | ISO/TC 29/SC 9 |
7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF
|
90.93 | ISO/TC 29/SC 9 |
7/24 tapers for tool shanks for automatic changing — Tapers for spindle noses
|
95.99 | ISO/TC 29 |
Machine tools — Jaw mountings on power chucks
|
95.99 | ISO/TC 39/SC 8 |
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
|
95.99 | ISO/TC 29 |
Cutter arbors with parallel key and tenon drive — Part 1: General dimensions
|
90.60 | ISO/TC 29/SC 9 |
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with hollow taper interface with flange contact surface
|
95.99 | ISO/TC 29 |
Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
|
90.60 | ISO/TC 29/SC 9 |
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changers
|
95.99 | ISO/TC 29 |
Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
|
90.60 | ISO/TC 29/SC 9 |
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changers
|
95.99 | ISO/TC 29 |
Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
|
90.60 | ISO/TC 29/SC 9 |
Cutter arbors with parallel key and tenon drive — Part 5: Dimensions and designation of tool holders with polygonal taper interface with flange contact surface
|
90.60 | ISO/TC 29/SC 9 |
Cutter arbors with parallel key and tenon drive — Part 6: Dimensions and designation of tool holders with modular taper interface with ball track system
|
90.60 | ISO/TC 29/SC 9 |
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 5: Type D with more than one rectangular seat
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with cylindrical shank — Part 7: Type F with taper seat
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 7: Type F with taper seat
|
95.99 | ISO/TC 29 |
Tool holders with cylindrical shank — Part 7: Type F with taper seat
|
90.93 | ISO/TC 29/SC 9 |
Tool holders with cylindrical shank — Part 8: Type Z, accessories
|
90.93 | ISO/TC 29/SC 9 |
Collets for tool holders with taper ratio 1:10 — Collets, hoders,nuts
|
95.99 | ISO/TC 29 |
Collets for tool holders with taper ratio 1:10 — Collets, holders, nuts
|
90.93 | ISO/TC 29/SC 9 |
Hollow taper interface with flange contact surface — Part 1: Shanks — Dimensions
|
95.99 | ISO/TC 29/SC 9 |
Hollow taper interface with flange contact surface — Part 1: Shanks of types A, AB, C, CB and EB
|
60.60 | ISO/TC 29/SC 9 |
Hollow taper interface with flange contact surface — Part 2: Receivers — Dimensions
|
95.99 | ISO/TC 29/SC 9 |
Hollow taper interface with flange contact surface — Part 2: Receivers of types A, C and E for hollow taper shanks of types A, AB, C, CB and EB
|
60.60 | ISO/TC 29/SC 9 |
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
|
95.99 | ISO/TC 29 |
Hollow taper interface with flange contact surface — Part 3: Dimensions of shanks for stationary tools
|
95.99 | ISO/TC 29/SC 9 |
Hollow taper interface with flange contact surface — Part 3: Shanks of types T, TA and U
|
60.60 | ISO/TC 29/SC 9 |
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
|
95.99 | ISO/TC 29 |
Hollow taper interface with flange contact surface — Part 4: Dimensions of receivers for stationary tools
|
95.99 | ISO/TC 29/SC 9 |
Hollow taper interface with flange contact surface — Part 4: Receivers of types T and U for hollow taper shanks of types T, TA and U
|
60.60 | ISO/TC 29/SC 9 |
Hollow taper interface with flange contact surface — Part 5: Shanks of types AS, CS and ES
|
60.60 | ISO/TC 29/SC 9 |
Hollow taper interface with flange contact surface — Part 6: Receivers of types AS, CS and ES for hollow taper shanks of types AS, CS and ES
|
60.60 | ISO/TC 29/SC 9 |
Code of practice for the safe operation of work-holding chucks used on lathes
|
95.99 | ISO/TC 39/SC 8 |
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
|
95.99 | ISO/TC 29 |
Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions
|
90.93 | ISO/TC 29/SC 9 |
Machine tools — Work holding chucks — Vocabulary
|
90.93 | ISO/TC 39/SC 8 |
Medium-transfer units for tool interfaces — Part 1: Transfer units for hollow taper shanks in accordance with the ISO 12164 series
|
60.60 | ISO/TC 29/SC 9 |
Medium-transfer units for tool interfaces — Part 2: Transfer units for polygonal taper interfaces in accordance with the ISO 26623 series
|
60.60 | ISO/TC 29/SC 9 |
Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
|
95.99 | ISO/TC 29 |
Modular taper interface with ball track system — Part 1: Dimensions and designation of shanks
|
90.93 | ISO/TC 29 |
Modular taper interface with ball track system — Part 2: Dimensions and designation of receivers
|
90.60 | ISO/TC 29/SC 9 |
Modular taper interface with ball track system — Part 3: Part 3: Dimensions of shanks, four locking elements
|
30.60 | ISO/TC 29/SC 9 |
Modular taper interface with ball track system — Part 4: Part 4: Dimensions ofreceivers, four locking elements
|
30.60 | ISO/TC 29/SC 9 |
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
|
95.99 | ISO/TC 29 |
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
|
95.99 | ISO/TC 29/SC 9 |
Polygonal taper interface with flange contact surface — Part 1: Dimensions and designation of shanks
|
60.60 | ISO/TC 29/SC 9 |
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
|
95.99 | ISO/TC 29 |
Polygonal taper interface with flange contact surface — Part 2: Dimensions and designation of receivers
|
90.93 | ISO/TC 29/SC 9 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.