Filter :
Standard and/or project under the direct responsibility of ISO/TC 108/SC 2 Secretariat | Stage | ICS |
---|---|---|
Mechanical vibration — Balancing — Vocabulary
|
95.99 | |
Mechanical vibration — Balance quality requirements for rotors in a constant (rigid) state — Part 1: Specification and verification of balance tolerances
|
95.99 | |
Mechanical vibration — Balance quality requirements for rotors in a constant (rigid) state — Part 1: Specification and verification of balance tolerances — Technical Corrigendum 1
|
95.99 | |
Mechanical vibration — Balance quality requirements of rigid rotors — Part 2: Balance errors
|
95.99 | |
Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards
|
95.99 | |
Mechanical vibration of machines with operating speeds from 10 to 200 rev/s — Basis for specifying evaluation standards — Amendment 1
|
95.99 | |
Mechanical vibration of certain rotating electrical machinery with shaft heights between 80 and 400 mm — Measurement and evaluation of the vibration severity
|
95.99 | |
Mechanical vibration — Balancing machines — Description and evaluation
|
95.99 | |
Mechanical vibration — Symbols for balancing machines and associated instrumentation
|
95.99 | |
Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s — Measurement and evaluation of vibration severity in situ
|
95.99 | |
Resilient shaft couplings — Information to be supplied by users and manufacturers
|
90.93 | |
Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings
|
95.99 | |
Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 1
|
95.99 | |
Mechanical vibration and shock — Vibration of buildings — Guidelines for the measurement of vibrations and evaluation of their effects on buildings — Amendment 2
|
95.99 | |
Mechanical vibration and shock — Vibration of fixed structures — Guidelines for the measurement of vibrations and evaluation of their effects on structures
|
90.93 | |
Code for the measurement and reporting of shipboard vibration data
|
95.99 | |
Code for the measurement and reporting of local vibration data of ship structures and equipment
|
95.99 | |
Mechanical vibration and shock — Guidelines for the overall evaluation of vibration in merchant ships
|
95.99 | |
Mechanical vibration — Guidelines for the measurement, reporting and evaluation of vibration with regard to habitability on passenger and merchant ships
|
95.99 | |
Mechanical vibration — Balancing machines — Enclosures and other protective measures for the measuring station
|
95.99 | |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation — Part 1: General guidelines
|
95.99 | |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 1: General guidelines
|
95.99 | |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 2: Large land-based steam turbine generator sets
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
|
95.99 | |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 3: Coupled industrial machines
|
95.99 | |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 3: Coupled industrial machines — Technical Corrigendum 1
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 3: Coupled industrial machines — Amendment 1
|
95.99 | |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 4: Gas turbine sets
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1
|
95.99 | |
Mechanical vibration of non-reciprocating machines — Measurements on rotating shafts and evaluation criteria — Part 5: Machine sets in hydraulic power generating and pumping plants
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on rotating shafts — Part 5: Machine sets in hydraulic power generating and pumping plants
|
95.99 | |
Mechanical vibrations — Land vehicles — Method for reporting measured data
|
90.93 | |
Mechanical vibration — Shock-and-vibration-sensitive electronic equipment — Methods of measurement and reporting data of shock and vibration effects in buildings
|
95.99 | |
Mechanical vibration and shock — Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings
|
95.99 | |
Mechanical vibration — Road surface profiles — Reporting of measured data
|
95.99 | |
Mechanical vibration — Road surface profiles — Reporting of measured data
|
90.93 | |
Mechanical vibration — Balancing — Shaft and fitment key convention
|
95.99 | |
Mechanical vibration — Vibration testing requirements for shipboard equipment and machinery components
|
90.93 | |
Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1: Measurement and evaluation
|
90.93 | |
Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification
|
90.93 | |
Mechanical vibration — Susceptibility and sensitivity of machines to unbalance
|
95.99 | |
Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains
|
95.99 | |
Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains
|
90.93 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 1: General guidelines — Amendment 1
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Large land-based steam turbine generator sets in excess of 50 MW
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1500 r/min, 1800 r/min, 3000 r/min and 3600 r/min — Technical Corrigendum 1
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 2: Land-based steam turbines and generators in excess of 50 MW with normal operating speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 3: Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ — Amendment 1
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine driven sets excluding aircraft derivatives
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 4: Gas turbine sets with fluid-film bearings — Amendment 1
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 5: Machine sets in hydraulic power generating and pumping plants
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW
|
90.93 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW — Amendment 1
|
60.60 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
|
90.93 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 8: Reciprocating compressor systems
|
95.99 | |
Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 21: Horizontal axis wind turbines with gearbox
|
90.92 | |
Mechanical vibration — Methods and criteria for the mechanical balancing of flexible rotors
|
95.99 | |
Mechanical vibration — Methods and criteria for the mechanical balancing of flexible rotors — Technical Corrigendum 1
|
95.99 | |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures
|
90.93 | |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data
|
95.99 | |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data
|
90.93 | |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 3: Guidelines for vibration diagnosis
|
90.93 | |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 4: Diagnostic techniques for gas and steam turbines with fluid-film bearings
|
60.60 | |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 5: Diagnostic techniques for fans and blowers
|
60.60 | |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
|
90.92 | |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
|
10.99 |
|
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 8: Diagnostic techniques for industrial pumps
|
20.00 |
|
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors
|
90.92 | |
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 9: Diagnostic techniques for electric motors
|
30.99 |
|
Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 10: Diagnostic techniques for electrical generators with fluid-film bearings
|
60.60 | |
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 1: General guidance
|
90.93 | |
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
|
90.93 | |
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground
|
90.93 | |
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 33: Guideline on field measurements to evaluate performance of mitigation measures
|
20.00 |
|
Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 34: Characterizing irregularity of the running surfaces with respect to vibration excitation
|
60.60 | |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary
|
95.99 | |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary — Amendment 1
|
95.99 | |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 1: Vocabulary
|
90.93 | |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 2: Evaluation of vibration
|
90.93 | |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 3: Evaluation of stability margin
|
90.93 | |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 4: Technical guidelines
|
90.93 | |
Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 5: Touch-down bearings
|
60.60 | |
Mechanical vibration and shock — Guidelines for dynamic tests and investigations on bridges and viaducts
|
90.93 | |
Mechanical vibration and shock — Vibration of stationary structures — Specific requirements for quality management in measurement and evaluation of vibration
|
95.99 | |
Mechanical vibration — Evaluation of measurement results from dynamic tests and investigations on bridges
|
90.93 | |
Mechanical vibration — Methodology for selecting appropriate machinery vibration standards
|
90.93 | |
Mechanical vibration — Balancing — Guidance on the use and application of balancing standards
|
95.99 | |
Mechanical vibration — Measurement of vibration on ships — Part 2: Measurement of structural vibration
|
90.93 | |
Mechanical vibration — Measurement of vibration on ships — Part 3: Pre-installation vibration measurement of shipboard equipment
|
90.93 | |
Mechanical vibration — Measurement of vibration on ships — Part 3: Pre-installation vibration measurement of shipboard equipment — Amendment 1
|
60.60 | |
Mechanical vibration — Measurement of vibration on ships — Part 4: Measurement and evaluation of vibration of the ship propulsion machinery
|
90.93 | |
Mechanical vibration — Measurement of vibration on ships — Part 4: Measurement and evaluation of vibration of the ship propulsion machinery — Amendment 1
|
60.60 | |
Mechanical vibration — Measurement of vibration on ships — Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships
|
90.93 | |
Mechanical vibration — Criteria and safeguards for the in-situ balancing of medium and large rotors
|
95.99 | |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines
|
90.92 | |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines
|
30.60 |
|
Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min
|
90.93 | |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 2: Land-based gas turbines, steam turbines and generators in excess of 40 MW, with fluid-film bearings and rated speeds of 1 500 r/min, 1 800 r/min, 3 000 r/min and 3 600 r/min — Amendment 1
|
60.60 | |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 3: Industrial machinery with a power rating above 15 kW and operating speeds between 120 r/min and 30 000 r/min
|
90.92 | |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 3: Industrial machinery with operating speeds between 120 r/min and 30 000 r/min
|
30.60 |
|
Mechanical vibration — Measurement and evaluation of machine vibration — Part 4: Gas turbines in excess of 3 MW, with fluid-film bearings
|
90.93 | |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 5: Machine sets in hydraulic power generating and pump-storage plants
|
90.93 | |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 8: Reciprocating compressor systems
|
90.93 | |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 9: Gear units
|
60.60 | |
Mechanical vibration — Measurement and evaluation of machine vibration — Part 21: Horizontal axis wind turbines
|
40.60 | |
Mechanical vibration — Rotor balancing — Part 1: Introduction
|
90.93 | |
Mechanical vibration — Rotor balancing — Part 2: Vocabulary
|
90.93 | |
Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour
|
90.93 | |
Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour — Amendment 1
|
60.60 | |
Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with flexible behaviour
|
90.92 | |
Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with flexible behaviour
|
30.20 |
|
Mechanical vibration — Rotor balancing — Part 13: Criteria and safeguards for the in-situ balancing of medium and large rotors
|
90.93 | |
Mechanical vibration — Rotor balancing — Part 14: Procedures for assessing balance errors
|
90.92 | |
Mechanical vibration — Rotor balancing — Part 14: Procedures for assessing balance errors — Amendment 1
|
60.60 | |
Mechanical vibration — Rotor balancing — Part 14: Procedures for assessing balance errors
|
10.99 |
|
Mechanical vibration — Rotor balancing — Part 21: Description and evaluation of balancing machines
|
95.99 | |
Mechanical vibration — Rotor balancing — Part 21: Description and evaluation of balancing machines
|
60.60 | |
Mechanical vibration — Rotor balancing — Part 23: Enclosures and other protective measures for the measuring station of balancing machines
|
90.93 | |
Mechanical vibration — Rotor balancing — Part 24: Assessment of the unbalance measuring process
|
10.99 |
|
Mechanical vibration — Rotor balancing — Part 31: Susceptibility and sensitivity of machines to unbalance
|
90.92 | |
Mechanical vibration — Rotor balancing — Part 31: Susceptibility and sensitivity of machines to unbalance
|
20.00 |
|
Mechanical vibration — Rotor balancing — Part 32: Shaft and fitment key convention
|
90.93 | |
Mechanical vibration — Torsional vibration of rotating machinery — Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW
|
95.99 | |
Mechanical vibration — Torsional vibration of rotating machinery — Part 1: Evaluation of steam and gas turbine generator sets due to electrical excitation
|
60.60 |
No matching records found. Please try changing the filter settings.